Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
7 results
Search Results
Item Study on low-frequency dielectric behavior of the carbon black/polymer nanocomposite(Springer, 2021) Hiremath, H.; Mathias, K.A.; Sondar, P.R.; Shrishail, M.H.; Kulkarni, S.M.Recently, polymer-based dielectric materials have become one of the key materials to play an essential role in clean energy production, energy transformation, and energy storage applications. The end usage is the energy storage capability because it is a trade-off between dielectric permittivity, dielectric loss, and dissipation factor. Hence, it is of prime importance to study the dielectric properties of polymer materials by adding filler material at a low-frequency range. In the present study, polydimethylsiloxane/carbon black nanocomposites are prepared using the solution cast method. The dielectric properties, such as dielectric constant, dielectric loss, and dissipation factors due to the concentration of filler particles and low-frequency effect on the nanocomposites, are examined. Also, different empirical models are used to estimate the dielectric permittivity of polymer nanocomposites. The low-frequency range of 100 Hz to 1 MHz and the effect of varying volume fractions of carbon black show a significant change in the dielectric properties. It is found that the nanocomposites have a higher dielectric permittivity than the base polymer material. It is also observed that an increase in filler concentration increases the dielectric permittivity, which is confirmed with an empirical model. © 2021, The Author(s).Item A study on solubility of bismuth cations in nickel cobalt ferrite nanoparticles and their influence on dielectric and magnetic properties(Elsevier Ltd, 2023) Patil, S.; Meti, S.; Kanavi, P.S.; Bhajantri, R.F.; Anandalli, M.; Mondal, R.; Karmakar, S.; Muhiuddin, M.; Rahman, M.R.; Kumar, B.C.; Hegde, B.G.In this work, a low temperature (∼600 °C) solution combustion technique is employed for the synthesis of Ni0.5Co0.5BixFe2-xO4 (NCBFO, where x = 0.0, 0.05, 0.1, 0.15, & 0.2) nanoparticles with crystallite size variation of 17–22 nm. The X-ray diffraction (XRD) technique is used to confirm the formation of cubic spinel phase of Bi3+ doped (for x ≤ 0.05 samples) nickel–cobalt ferrite (NCFO) nanoparticles. The increase in bismuth substitution (x > 0.05) results in the formation of the Bi2O3 along with the NCFO structure, which results in the reduction of binding energy and is confirmed by the XRD and X-ray photoelectron spectroscopy (XPS) techniques. From the Raman spectra, the change in the intensities of the peaks is observed due to the variation of Bi3+ in NCFO matrix. Due to increasing cation concentration and electronegativity, the FTIR absorption band shifts toward the lower wave numbers. Dielectric measurements were carried out to examine the charge transport behavior and electric conduction mechanism. The FESEM images shows the non-magnetic bismuth atoms are diffused into the NCFO nanoparticles. From the vibrating sample magnetometer (VSM) analysis, it is observed that saturation magnetization, remanent magnetization, coercivity and squareness ratio are found to be maximum for x = 0.15 NCBFO sample. The high coercivity (Hc = 916.8 Oe) for the x = 0.15 sample indicates the hard ferromagnetic behaviour of the samples. © 2023 Elsevier B.V.Item Role of Mg–O on phase stabilization in solution combustion processed rocksalt structured high entropy oxide (CoCuMgZnNi)O with high dielectric performance(Elsevier Ltd, 2023) Salian, A.; Praveen, L.L.; P, S.K.; Mandal, S.High entropy oxide (CoCuMgZnNi)O with a phase pure rocksalt was synthesized using low-temperature solution combustion. The precursors were found to combust at 270 °C and 400 °C was considered to be the formation temperature. The high entropy rocksalt oxide (HERO) fully stabilized at 1000 °C shows a single-phase, fcc rocksalt structure with an Fm-3m space group. HERO displays one of its parent oxide Mg–O structural properties as both belong to the cubic family and had lattice parameters very close to each other. The lower cation systems exhibited a transition from spinel to rocksalt structure with the addition of Mg–O. Raman of HERO affirmed a completely disordered occupancy of various metal cations, the formation of HERO at 400 °C, and phase stabilization at 1000 °C. Dielectric measurements at room temperature showed high permittivity (κ) with magnitudes ∼1.9 × 103, 4.7× 101, and 0.9 × 101 at 100, 1k, and 100k Hz. © 2023 Elsevier Ltd and Techna Group S.r.l.Item Phase stabilized solution combustion processed (Ce0.2La0.2Pr0.2Sm0.2Y0.2)O1.6-δ: An exploration of the dielectric properties(Elsevier Ltd, 2023) Salian, A.; K, A.P.; Mandal, S.High entropy oxide (HEO) (Ce0.2La0.2Pr0.2Sm0.2Y0.2)O1.6-δ with a phase pure fluorite was synthesized using low-temperature solution combustion. A low-temperature formation of HEO was evidenced at 500 ºC. The HEO formation at 500 ºC was due to the exothermicity of the combustion redox reaction, where the internal temperature might have reached a much higher temperature for a limited amount of time. The presence of Sm2O3 and Y2O3 was visible upto 500 ºC, while La2O3 was detected up to 900 ºC and the HEO fully got stabilized at 1000 ºC with a single-phase, fcc fluorite structure with an Fm-3 m space group. The HEO displays one of its parent oxide Ce-O structural properties as both belong to the fluorite family and had lattice parameters very close to each other. The presence of a secondary phase in the 2 and 3-cation systems and the display of a single phase in the 4 and 5-cation systems indicated the role of configurational entropy in phase stabilization. Raman of HEO also affirmed the formation of HEO at 500 °C, the complete elimination of secondary phases at 1000 °C, and a fully disordered occupancy of various metal cations with severe lattice distortion. A Flake morphology with a nanogranular cluster on the surface was displayed. Dielectric measurements at room temperature showed permittivity (κ) ≈ 29 – 5.7 from 100 Hz to 1 MHz. © 2023 Elsevier B.V.Item Ionic Surfactant-Assisted PVDF Nanofabrics with High Dielectric and Excellent Piezoelectric Performance(Korean Fiber Society, 2024) Khalifa, M.; Lammer, H.; Anandhan, S.Flexible dielectrics and piezoelectric sensors have attracted a number of applications in advanced electronic systems. In this regard, poly(vinylidene fluoride) (PVDF) is considered as a promising option due to its flexibility and ferroelectric properties. In this study, a highly flexible non-woven fabric was developed from electrospun PVDF nanofibers containing cationic and anionic surfactants. Cetrimonium bromide (CTAB) was used as a cationic surfactant, while sodium lauryl sulfate (SLS) was used as an anionic surfactant. The presence of cationic and anionic surfactants played a pivotal role in the production of finer fibers. PVDF-SLS nano-fabric exhibited oriented fibers, while PVDF-CTAB nano-fabric displayed randomly arranged fibers. PVDF-SLS-based nano-fabric displayed the highest β-phase content of 98.2%, while PVDF-CTAB non-woven showed a β-phase content of 91.6%. A significant improvement in the dielectric properties of PVDF nano-fabric was observed upon the addition of cationic and anionic surfactants. Furthermore, PVDF-SLS nano-fabric demonstrated exceptional dielectric and piezoelectric properties, generating a piezoelectric voltage of ~ 19 V. In comparison, PVDF-CTAB nano-fabric exhibited a piezoelectric voltage of 12.5 V. The power density of PVDF improved significantly upon the addition of SLS surfactant. Such attributes position PVDF-SLS nanofabrics as valuable candidates for diverse applications, particularly in the field of piezoelectric sensors and energy storage devices. The research not only advances the understanding of optimizing PVDF nanofabrics, but also establishes a foundation for future exploration in the realm of flexible electronics. Graphical Abstract: (Figure presented.) © The Author(s), under exclusive licence to the Korean Fiber Society 2024.Item Investigation of structural, thermal, magnetic, and dielectric properties of Yb+3 doped nickel cobalt ferrite nanomaterial for electro-magnetic applications(Springer, 2024) Patil, S.; Meti, S.; Anandalli, M.; Badiger, H.; Bhajantri, R.F.; Pratheek, L.; Muhiuddin, M.; Rahman, M.R.; Hegde, B.G.Herein, we report the synthesis of ytterbium (Yb) (with concentration x = 0.01, 0.015, 0.02, 0.025 and 0.03) doped in to nickel cobalt ferrite (NCYFO: YbxNi0.5Co0.5Fe2-xO4) nanoparticles at temperature 500 °C with phase pure spinel using solution combustion technique. The phase purity and effect of doping on NCYFO complex oxide on structural, thermal, magnetic and dielectric properties have been determined by various characterization techniques. The FTIR data reveal that strong metal oxide linkages can be observed in the tetrahedral and octahedral sites at wavenumbers 460 to 410 cm−1 and 595 to 540 cm−1. The X-ray diffraction (XRD) studies confirmed the spinel structure. The crystallite sizes and lattice parameters were estimated to be in the range of 31 to 22 nm and 8.32 to 8.35 Å, respectively. The X-ray photoelectron spectroscopy (XPS) study confirmed that the increase in Yb concentration results in accumulation of Yb in the grain boundaries of NCYFO in the form of Yb2O3. The thermal stability of nanoparticles were investigated using TGA/DSC method. Transmission Electron microscopy (TEM) studies and Field emission scanning electron microscopy (FESEM) used to study the particle size distribution and elemental composition within the nanomaterial. In addition, the dielectric properties, such as, dielectric constant and dielectric loss were investigated for all the NCYFO nanomaterial. The saturation magnetization of the NCYFO is determined using vibrating sample magnetometer (VSM) analysis and is maximum for x = 0.03 (Ms = 97.56 emu/g) sample. The high magnetic behaviour and better dielectric properties of the NCYFO nanomaterials are suitable for electro-magnetic applications. © The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature 2024.Item Investigation of dielectric properties and shore hardness of 3D-printed PLA core sandwich disc with functional ceramics surface cladding(KeAi Publishing Communications Ltd., 2025) Senthil Murugan, S.S.; Kattimani, S.; Bharadwaj, N.Poly-lactic acid (PLA), a popular biodegradable polymer for 3D printing, has limited dielectric strength and surface hardness, restricting its use in advanced electronic and structural applications. Existing enhancement methods are often complex or yield inconsistent results. Therefore, a straightforward and scalable approach is necessary to enhance the properties of 3D-printed PLA. This study aims to explore the enhancement of the dielectric and surface hardness of printed PLA discs through surface cladding using nano-functional ceramics and graphene for next-generation multifunctional applications. PLA discs were fabricated via Fused Deposition Modelling (FDM) and subsequently cladded using hand layup with Araldite resin as a binder. Cladding materials included cobalt ferrite (CF), barium titanate (BTO), and graphene (Gr), individually and in combinations. Dielectric properties—capacitance, impedance, dielectric constant, dielectric loss, dissipation factor, and AC conductivity—were analyzed using an impedance analyzer, while surface hardness was measured using a Shore-D durometer. Results revealed that cladding led to uniform particle dispersion with effective surface bonding, improved dielectric performance, and significantly enhanced surface hardness. The CF + BTO + Gr combination exhibited superior dielectric behaviour, balancing high polarization with low energy dissipation, while BTO contributed to an enhanced dielectric constant and graphene improved charge transfer. All cladded samples showed frequency-dependent dielectric responses, with stability at higher frequencies. The highest surface hardness was achieved with CF + BTO, attributed to rigid, uniform reinforcement. © 2025 The Authors. Publishing services by Elsevier B.V. on behalf of KeAi Communications Co. Ltdé This is an open access article under the CC BY-NC-ND license. http://creativecommons.org/licenses/by-nc-nd/4.0/