Investigation of dielectric properties and shore hardness of 3D-printed PLA core sandwich disc with functional ceramics surface cladding

Abstract

Poly-lactic acid (PLA), a popular biodegradable polymer for 3D printing, has limited dielectric strength and surface hardness, restricting its use in advanced electronic and structural applications. Existing enhancement methods are often complex or yield inconsistent results. Therefore, a straightforward and scalable approach is necessary to enhance the properties of 3D-printed PLA. This study aims to explore the enhancement of the dielectric and surface hardness of printed PLA discs through surface cladding using nano-functional ceramics and graphene for next-generation multifunctional applications. PLA discs were fabricated via Fused Deposition Modelling (FDM) and subsequently cladded using hand layup with Araldite resin as a binder. Cladding materials included cobalt ferrite (CF), barium titanate (BTO), and graphene (Gr), individually and in combinations. Dielectric properties—capacitance, impedance, dielectric constant, dielectric loss, dissipation factor, and AC conductivity—were analyzed using an impedance analyzer, while surface hardness was measured using a Shore-D durometer. Results revealed that cladding led to uniform particle dispersion with effective surface bonding, improved dielectric performance, and significantly enhanced surface hardness. The CF + BTO + Gr combination exhibited superior dielectric behaviour, balancing high polarization with low energy dissipation, while BTO contributed to an enhanced dielectric constant and graphene improved charge transfer. All cladded samples showed frequency-dependent dielectric responses, with stability at higher frequencies. The highest surface hardness was achieved with CF + BTO, attributed to rigid, uniform reinforcement. © 2025 The Authors. Publishing services by Elsevier B.V. on behalf of KeAi Communications Co. Ltdé This is an open access article under the CC BY-NC-ND license. http://creativecommons.org/licenses/by-nc-nd/4.0/