Journal Articles
Permanent URI for this collectionhttps://idr.nitk.ac.in/handle/123456789/19884
Browse
48 results
Search Results
Item Semiconducting thin films of cadmium selenide have been grown by conventional thermal evaporation technique. The effect of various growth parameters like rate of deposition and deposition temperature has been studied in detail. Films deposited at room temperature are cadmium rich with segregated selenium globules. A deposition temperature of 453K has been found to yield stoichiometric, homogeneous films. The films have been analysed for optical band gap and thermal activation energies. Films of low electrical resistivity have been obtained for possible applications.(Growth and characterization of semiconducting cadmium selenide thin films) Shreekanthan, K.N.; Rajendra, B.V.; Kasturi, V.B.; Shivakumar, G.K.2003Item Photoconductivity has been studied in cadmium selenide thin films prepared by thermal evaporation in vacuum. Attempts have been made to correlate the photoresponse with the deposition conditions. It has been observed that as-grown films, irrespective of the cadmium content, are not photosensitive and that baking in air, especially above 723 K, leads to considerable improvement in the photoconducting properties of cadmium selenide films.(Photoconductivity in vacuum deposited cadmium selenide thin films) Rajendra, B.V.; Kasturi, V.B.; Shivakumar, G.K.2004Item Activated carbon-polyethylenedioxythiophene composite electrodes for symmetrical supercapacitors(2008) Muthu, M.S.; Bhat, D.K.A symmetrical (p/p) supercapacitor has been fabricated by making use of activated carbon (AC)-poly-ethylenedioxythiophene (PEDPT)-composite electrodes for the first time. The composite electrodes have been prepared via electrochemical deposition of ?-napthalenesulphonate doped PEDPT onto AC electrodes. The characteristics of the electrodes and the fabricated supercapacitor have been investigated using cyclic voltammetry (CV) and AC impedance spectroscopy. The electrodes show a maximum specific capacitance of 158 Fg-1 at a scan rate of 10 mV s_1. This indicates that the in situ electro-polymerization of ethylenedioxythiophene (EDPT) onto AC could improve the performance of carbon electrodes for use in supercapacitors. © 2007 Wiley Periodicals, Inc.Item The effect of substrate temperature on the structural, optical and electrical properties of vacuum deposited ZnTe thin films(2009) Rao, G.K.; Bangera, K.V.; Shivakumar, G.K.The present paper reports the effect of substrate temperature on the structural, optical and electrical properties of vacuum deposited zinc telluride (ZnTe) thin films. X-ray diffraction (XRD) analysis of the films, deposited on glass substrates, revealed that they have cubic structure with strong (111) texture. Room temperature deposits are tellurium rich and an increase in the substrate temperature up to 553 °K results in stoichiometric films. Electrical conductivity has been observed to increase with the increase in substrate temperature, accompanied by increase in the carrier concentration and the mobility of the carriers. The optical bandgap energy and the thermal activation energy of the films have also been evaluated. © 2009 Elsevier Ltd. All rights reserved.Item Studies on the photoconductivity of vacuum deposited ZnTe thin films(2010) Rao, K.G.; Bangera, K.V.; Shivakumar, G.K.The present paper reports the analysis of photoconductivity of vacuum deposited zinc telluride (ZnTe) thin films as a function of substrate temperature and post-deposition annealing. Detailed analyses were first carried out to understand the effect of substrate temperature and annealing on the structure, composition, optical and electrical properties of the films. The films deposited at elevated substrate temperatures showed faster and improved photoresponse. Post-deposition annealing was found to further enhance the photoresponse of the films. Attempts have been made to explain the improvement in the photoresponse on the basis of structural and compositional changes, taking place in the films, due to the substrate temperature and annealing. © 2010 Elsevier Ltd. All rights reserved.Item Magnetic property and corrosion resistance of electrodeposited nanocrystalline iron-nickel alloys(Elsevier B.V., 2012) Pavithra, G.P.; Hegde, A.In the present investigation we have galvanostatically synthesized nanocrystalline Fe-Ni alloys on copper substrate. The effect of current density (c.d.) on composition, surface morphology and phase structure were studied for explaining the magnetic and electrochemical properties of the nanocrystalline alloy. The bath found to exhibit the preferential deposition of less noble Fe than Ni, and at no conditions of c.d., the deposition has changed from anomalous to normal type. Surface morphology and structural characteristics of the deposits were examined using scanning electron microscopy (SEM) and X-ray diffraction (XRD) analysis. As composition of the alloy varied, consequent to the current density a change of body centered cubic structure (bcc) to face centered cubic structure (fcc) was observed for nanocrystalline materials. Finally, the conditions responsible for peak magnetic property and corrosion resistance were optimized. Factors responsible for improved functional properties were explained in terms of surface morphology and crystalline grain size of the coatings. © 2012 Elsevier B.V.Item Magnetic domain studies of cobalt nanostructures(2012) Nagaraja, H.S.; Nagaraja, K.K.; Rossignol, F.; Dumas-Bouchiat, F.; Champeaux, C.; Catherinot, A.The pulsed laser deposition technique associated with a low energy cluster beam is used to deposit cobalt thin films with a thickness 100-200 nm and cobalt dots of a diameter 100-200 nm on silicon substrates. The deposited thin films of Co are composed of clusters of a size 10- 50 nm, with very few large grains as revealed by atomic force microscopy. The observations performed by magnetic force microscopy on as-grown thin films reveal randomly distributed out-of-plane magnetic domain structures. These magnetic domains are aligned linearly by applying an external magnetic field either perpendicular or parallel to the substrate during the deposition. In addition, the effect of film thickness and roughness on multidomains is reported. The increase of roughness resulted in the decrease of magnetic domain width from 200 to 100 nm. This decrease is accompanied by the appearance of instability in the stripe domain pattern. Well separated cobalt dots of diameter in the range of 100-200 nm are also deposited on silicon substrates, which show arc-like multidomains. The domains seem to be oriented along the long axis of the dots. The domain structure of Co nanodots is similar to that of Co thin films indicating strong magnetic coupling of clusters. © Springer Science+Business Media, LLC 2012.Item Magnetically induced electrodeposition of Zn-Ni alloy coatings and their corrosion behaviors(Elsevier B.V., 2013) Rao, V.R.; Bangera, K.V.; Hegde, A.C.The less magnetic features of Zn-Ni alloy compared to Fe-Ni and Fe-Co alloys made it interesting to develop them under the influence of applied magnetic field. In this regard, the effects of a magnetic field (B) applied in a direction parallel and perpendicular to the nominal current, during electrodeposition process of Zn-Ni alloy have been investigated by means of X-ray diffraction and EDX analysis. The modification of crystal orientation by superimposition of a varying magnetic field is studied for alloys of constant nickel content (8 a %.), deposited at optimal current density (j) of 3.0 A dm-2. The effect of magnetic field on crystallographic orientation and hence the corrosion behaviors of the coatings were studied. The preferential orientations (101) and (002) of the zinc phase and (330) ?-Ni 5Zn21 phase are always favored to exist with parallel and perpendicular magnetic field. The preferential (321) ?-Ni 5Zn21 orientation is found to be the characteristic of perpendicular magnetic field. Further, Zn (100) orientation is found to be non-responsive to the effect of parallel magnetic field. The coatings developed using perpendicular magnetic field is more corrosion resistant compare to that for parallel magnetic field. This is attributed to the additional (321) ?-Ni5Zn21 orientations. The changes in the phase structure of the coatings deposited at different magnetic field are attributed to the effect caused by the magnetic convection induced in the electrolytic solution, called MHD effect (magneto-hydrodynamic effect). The chemical composition of the alloy was found to be same in both natural and magnetically induced deposition due to constant Ni content in the bath. The variation in the surface morphology of the coatings was studied by scanning electron microscopy (SEM). The Zn-Ni alloy coating deposited at 0.8 T perpendicular B showed the highest corrosion resistance (with corrosion rate=0.26 × 10-2 mm y-1) compared to the one with no B (corrosion rate = 14.46 × 10-2 mm y-1). The improved corrosion resistance of the coatings was discussed in the light of magnetic field effect on crystallographic orientation. © 2013 Elsevier B.V. All rights reserved.Item Corrosion protection of electrodeposited multilayer nanocomposite Zn-Ni-SiO2 coatings(2013) Ullal, Y.; Hegde, A.C.Multilayer nanocomposite coatings of Zn-Ni-SiO2 were deposited galvanostatically on mild steel (MS) from Zn-Ni bath, having Zn+2 and Ni+2 ions and uniformly dispersed nano-SiO2 particles. The corrosion characteristics and properties of multilayered nanocomposite (MNC) coatings were evaluated by electrochemical polarization and impedance methods. Such deposition conditions as, bath composition, cyclic cathode current densities (CCCD's) and number of layers were optimized for peak performance of coatings against corrosion. A significant improvement in the corrosion performance of MNC coatings was observed when a coating was changed from a monolayer to multilayer type. Corrosion rate (CR) of MNC coating decreased progressively with number of layers up to an optimal level, and then started increasing. The increase of CR at a higher degree of layering is attributed to diffusion of layers due to a very short deposition time, failing to give the enhanced corrosion protection. The formation of layers, inclusion of silica particle in MNC coating matrix were confirmed by SEM and XRD study. At optimal current densities, i.e. at 3.0-5.0 A/cm2, the Zn-Ni-SiO2 coating having 300 layers, represented as (Zn-Ni-SiO2)30/5.0/300 is found to be about 107 times more corrosion resistant than a monolayer Zn-Ni-SiO2 coating, developed from the same bath for the same time. The reasons responsible for the extended corrosion protection of MNC Zn-Ni-SiO2 coatings, compared to corresponding monolayer Zn-Ni and (Zn-Ni-SiO2) coatings were analyzed, and results were discussed. © 2013 Allerton Press, Inc.