Please use this identifier to cite or link to this item: https://idr.nitk.ac.in/jspui/handle/123456789/16896
Title: Effect of Equal Channel Angular Extrusion on Microstructure Mechanical Properties and Corrosion Behavior of Wrought AZ-Magnesium Alloys
Authors: Naik, Gajanan M.
Supervisors: S, Narendranath.
Keywords: Department of Mechanical Engineering;Equal Channel Angular Pressing;Magnesium Alloys;Microstructure;Grain Refinement;DRX;Mechanical Properties;Microhardnes;Corrosion;Scanning Electron Microscope;X-ray Diffraction;Annealing;aging;High-velocity oxy-fuel coating;Natural Sea Water
Issue Date: 2020
Publisher: National Institute of Technology Karnataka, Surathkal
Abstract: Wrought magnesium alloys are lightest engineering material and it has quite special properties which lead to particular applications. In specific, their highest strength to weight ratio, good machinability and high damping capability makes magnesium alloys tremendously attractive in aerospace, electronics, marine and automobile industries. Indeed, Magnesium alloys have poor tensile strength, ductility and corrosion resistance properties associated with other engineering materials like aluminium alloys, steels and super alloys etc. Therefore, many researchers worked on equal channel angular pressing of magnesium alloys to improve the mechanical properties and corrosion resistance. In this work, the effect of channel angles on material properties were investigated during equal channel angular pressing of AZ80/91 magnesium alloy using processing route-R at 523K, 598K and 663K processing temperature. Channel angles of 90⁰ and 110⁰, common corner angle of 30⁰ have been considered for the study. It has been revealed that the channel angle has a significant influence on deformation homogeneity, microhardness, ultimate tensile strength, ductility and corrosion behaviour of AZ80/91 magnesium alloys. Specifically, AZ80/91 Mg alloys processed through 90⁰ channel angle i.e die A is considered as optimal die parameter to improve above-said material properties. Investigation showing with reference to as-received AZ80 and AZ91 Mg alloy indicates 11 %, 14 % improvement of UTS and 69 %, 59 % enhancement in ductility after processing through 4P through die A (90º) at 598K respectively. Also, the corrosion rate reduces to 97 % and 99 % after processing the sample with 4P-ECAP die A (90º) at the same processing temperature for AZ80 and AZ91 Mg alloys respectively. This is mainly due to grain refinement and distribution of Mg17Al12 secondary phase during ECAP. Further, this work investigates the effect of annealing and aging treatment on microstructure and corrosion behaviour of as-received and ECAPed AZ80/91 Magnesium alloys. Here, annealing at 523K, 623K, and 723K were accomplished, meanwhile samples were cooled in the furnace after 6 h and 12 h of diffusion annealing treatment. In this study, samples were characterized by using optical microscopy (OM) and scanning electron microscopy (SEM) and electrochemical corrosion behavior of annealed AZ80/91 Mg alloy has beeninvestigated. With this, an attempt has been made to enhance the corrosion resistance of the AZ80/91 Mg alloy by changing its microstructure and re-distribution of secondary phase during annealing and aging treatment. It was found that corrosion rates are minimum at higher annealing temperature and aging time because of uniform distribution of secondary β-phases in Mg matrix, evidently shown in the microstructure of the heat-treated AZ80/91 Mg alloy. As a result, the annealing treatment at 723K for 12 h aging is desirable to enhance the corrosion resistance. Further enhancement of asreceived and ECAPed AZ80/91 Mg alloys were observed after High Velocity Oxy-Fuel (HVOF) coating of 316 stainless steel powder. Our results revealed that 316 stainless steel coating on ECAP-4P AZ80/91 Mg alloys were uniform and compact on substrate with a thickness of 80±5 µm. Furthermore, HVOF-coating process of 4P-ECAP significantly reduce corrosion rate at 3.5wt.% NaCl solution making it promising for industrial applications. The corrosion behaviour and effect of the ECAPed fine-grained magnesium alloy and coarse-grained as-received AZ80/91 Mg alloy was investigated in a 2.5wt.% NaCl, 3.5wt.% NaCl solution and Natural Sea Water (NSW) in order to explore the corrosion performance of ECAPed magnesium alloys in various environments. From, electrochemical corrosion experiments and surface morphology observations evidently shown that grain refinement exhibited improved corrosion resistance of the AZ80/91 alloy in all environments, also which shown a protective passive film on the surface to shield corrosion
URI: http://idr.nitk.ac.in/jspui/handle/123456789/16896
Appears in Collections:1. Ph.D Theses

Files in This Item:
File Description SizeFormat 
168004ME16P05.pdf9.17 MBAdobe PDFThumbnail
View/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.