Please use this identifier to cite or link to this item: https://idr.nitk.ac.in/jspui/handle/123456789/16057
Title: Comparison of Phase-Shift and Modified Gating Schemes on Working of DC-DC LCL-T Resonant Power Converter
Authors: Reddy V.B.
Harischandrappa N.
Issue Date: 2021
Citation: IEEE Transactions on Circuits and Systems II: Express Briefs , Vol. 68 , 1 , p. 346 - 350
Abstract: This brief discusses the operation and performance comparison of LCL-T DC-DC resonant power converter when controlled with fixed-frequency phase-shifted gating (PSG) and modified-gating signals (MGS) schemes. The converter is designed to operate in lagging power factor mode to accomplish zero-voltage switching (ZVS) of the inverter switches. The operating principle of the converter with the two proposed gating schemes is explained. A brief steady-state analysis of the converter using Fourier series approach is presented. The choice between PSG and MGS schemes is made by comparing the performance of the converter. It is found that both the gating schemes are effective in regulating the output voltage for variable input voltage and loading conditions. However, the efficiency of the converter is found to be higher with MGS due to the fact that only one switch loses ZVS as compared to two with the PSG when operated with maximum input voltage. Also, the variation in pulse-width angle (δ) required to regulate the output voltage is small in MGS as compared to that with PSG. A 300 W experimental prototype of the converter has been built and tested to verify the theoretical results. It is experimentally confirmed that the MGS control gives the better performance than the PSG control for different input voltage and loading conditions. © 2004-2012 IEEE.
URI: https://doi.org/10.1109/TCSII.2020.2992368
http://idr.nitk.ac.in/jspui/handle/123456789/16057
Appears in Collections:1. Journal Articles

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.