Please use this identifier to cite or link to this item:
Title: Microstructure and corrosion behavior of laser processed NiTi alloy
Authors: Marattukalam, J.J.
Singh, A.K.
Datta, S.
Das, M.
Balla, V.K.
Bontha, S.
Kalpathy, S.K.
Issue Date: 2015
Citation: Materials Science and Engineering C, 2015, Vol.57, , pp.309-313
Abstract: Abstract Laser Engineered Net Shaping (LENS ), a commercially available additive manufacturing technology, has been used to fabricate dense equiatomic NiTi alloy components. The primary aim of this work is to study the effect of laser power and scan speed on microstructure, phase constituents, hardness and corrosion behavior of laser processed NiTi alloy. The results showed retention of large amount of high-temperature austenite phase at room temperature due to high cooling rates associated with laser processing. The high amount of austenite in these samples increased the hardness. The grain size and corrosion resistance were found to increase with laser power. The surface energy of NiTi alloy, calculated using contact angles, decreased from 61 mN/m to 56 mN/m with increase in laser energy density from 20 J/mm2 to 80 J/mm2. The decrease in surface energy shifted the corrosion potentials to nobler direction and decreased the corrosion current. Under present experimental conditions the laser power found to have strong influence on microstructure, phase constituents and corrosion resistance of NiTi alloy. 2015 Elsevier B.V.
Appears in Collections:1. Journal Articles

Files in This Item:
There are no files associated with this item.

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.