Please use this identifier to cite or link to this item:
https://idr.nitk.ac.in/jspui/handle/123456789/11091
Title: | Evaluation of WEDM performance characteristics of Inconel 706 for turbine disk application |
Authors: | Sharma, P. Chakradhar, D. Narendranath, S. |
Issue Date: | 2015 |
Citation: | Materials and Design, 2015, Vol.88, , pp.558-566 |
Abstract: | Inconel 706 is a newly developed superalloy, which offers high mechanical strength alongwith easy fabricability thus making it suitable for turbine disk applications. Although Inconel 706 exhibits a substantial increase in stress rupture and tensile yield strength compared to other superalloys, its conventional machining yields poor surface finish and low dimensional accuracy of the machined components. Hence, wire electrical discharge machining (WEDM) of Inconel 706 has been performed and various performance attributes such as material removal rate (MRR), surface roughness (SR), recast surface, topography, microhardness, microstructural and metallurgical changes of the machined components have been evaluated. The experimental results revealed that servo voltage, pulse on time, and pulse off time greatly influence the MRR and SR. Due to high toughness of Inconel 706, no micro cracks were observed on the machined surface. Micro voids and micro globules are significantly reduced at low pulse on time and high servo voltage. But, there is a propensity of thick recast layer formation at high pulse on time and low servo voltage. EDAX analysis of recast surface exposed the existence of Cu and Zn which have migrated from the brass wire. The subsurface microhardness was changed to 80. ?m due to significant thermal degradation. 2015 Elsevier Ltd. |
URI: | http://idr.nitk.ac.in/jspui/handle/123456789/11091 |
Appears in Collections: | 1. Journal Articles |
Files in This Item:
There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.