Please use this identifier to cite or link to this item:
Title: Effect of boundary heat transfer coefficient and probe section size on cooling curves during quenching
Authors: Ramesh, G.
Narayan, Prabhu, K.
Issue Date: 2012
Citation: Materials Performance and Characterization, 2012, Vol.1, 1, pp.1-8
Abstract: In the present work the effect of boundary heat transfer coefficient and section size of quench probe material on cooling curves was investigated by using finite difference heat transfer based SolidCast software. Simulations were carried out at different combinations of heat transfer coefficient and quench probe diameter and thermal history at the geometric center of the probe was estimated to generate cooling curves. Simulation results show that both boundary heat transfer coefficient and quench probe diameter had a significant effect on the average cooling rate. A relationship between Grossmann quench severity (H), thermal conductivity of material, size of the probe, and average cooling rate was established. By using this model, for a known quench medium, probe size, and material it is possible to predict the average cooling rate of the probe. On the other-hand, for a given material and required cooling rate, cooling severity required from the quench media could be predicted and accordingly an appropriate quench medium can be selected. 2012 by ASTM International.
Appears in Collections:1. Journal Articles

Files in This Item:
There are no files associated with this item.

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.