Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
41 results
Search Results
Item Eliminated Phototoxicity of TiO2Particles by an Atomic-Layer-Deposited Al2O3Coating Layer for UV-Protection Applications(Wiley-VCH Verlag, 2016) Jang, E.; Sridharan, K.; Park, Y.M.; Park, T.J.We demonstrate the conformal coating of an ultrathin Al2O3layer on TiO2nanoparticles through atomic layer deposition by using a specifically designed rotary reactor to eliminate the phototoxicity of the particles for cosmetic use. The ALD reactor is modified to improve the coating efficiency as well as the agitation of the particles for conformal coating. Elemental and microstructural analyses show that ultrathin Al2O3layers are conformally deposited on the TiO2nanoparticles with a controlled thickness. Rhodamine B dye molecules on Al2O3-coated TiO2exhibited a long life time under UV irradiation, that is, more than 2 h, compared to that on bare TiO2, that is, 8 min, indicating mitigation of photocatalytic activity by the coated layer. The effect of carbon impurities in the film resulting from various deposition temperatures and thicknesses of the Al2O3layer on the photocatalytic activity are also thoroughly investigated with controlled experimental condition by using dye molecules on the surface. Our results reveal that an increased carbon impurity resulting from a low processing temperature provides a charge conduction path and generates reactive oxygen species causing the degradation of dye molecule. A thin coated layer, that is, less than 3 nm, also induced the tunneling of electrons and holes to the surface, hence oxidizing dye molecules. Furthermore, the introduction of an Al2O3layer on TiO2improves the light trapping thus, enhances the UV absorption. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, WeinheimItem Synthesis and photocatalytic properties of graphitic carbon nitride nanofibers using porous anodic alumina templates(Institute of Physics Publishing helen.craven@iop.org, 2017) Suchitra, S.M.; Udayashankar, N.K.In the present study, we describe an effective method for the synthesis of Graphitic carbon nitride (GCN) nanostructures using porous anodic alumina (AAO) membrane as template by simple thermal condensation of cyanamide. Synthesized nanostructure was fully analysed by various techniques to detect its crystalline nature, morphology, luminescent properties followed by the evaluation of its photocatalytic activity in the degradation of Methylene blue dye. Structural analysis of synthesized GCNNF was systematically carried out using x-ray powder diffraction (XRD) and scanning electron microscope (SEM), and. The results confirmed the growth of GCN inside the nanochannels of anodic alumina templates. Luminescent properties of GCNNF were studied using photoluminescence (PL) spectroscopy. PL analysis showed the presence of a strong emission peak in the wavelength range of 350-600 nm in blue region. GCNNF displays higher photocatalytic performance in the photodegradation of methylene blue compare to the bulk GCN. Highlights 1. In the present paper, we report the synthesis of graphitic carbon nitride nanofibers (GCNNF) using porous anodic aluminium oxide membranes as templates through thermal condensation of cyanamide at 500 °C. 2. The synthesis of Graphitic carbon nitride nanofibers using porous andic alumina template is the efficient approach for increasing crystallinity and surface area. 3. The high surface area of graphitic carbon nitride nanofibers has a good impact on novel optical and photocatalytic properties of the bulkGCN. 4. AAO templating of GCN is one of the versatile method to produce tailorable GCN nanostructures with higher surface area and less number of structural defects. 5. Towards photocatalytic degradation of dyes, the tuning of physical properties is very essential thing hence we are succeeded in achieving better catalytic performance of GCN nanostructures by making use of AAO templates. © 2017 IOP Publishing Ltd.Item Decolorization of Reactive Blue 220 aqueous solution using fungal synthesized Co3O4 nanoparticles(IWA Publishing 12 Caxton Street London SW1H 0QS, 2019) Valappil, R.S.K.; Vijayanandan, A.S.; Mohan Balakrishnan, R.M.In this work, the photocatalytic activity of the biosynthesized cobalt oxide (Co3O4) nanoparticle (NP) is investigated using a textile dye Reactive Blue 220 (RB220) and decolorization % was monitored using UV–Vis spectrophotometer. The photocatalytic activity has been observed maximum at alkaline pH of 9, NP dosage of 250 mg/L, and reaction time of 270 min. In the presence of UV light irradiation, a maximum dye concentration of 10 mg/L was treated effectively using 150 mg/L NP, and 67% decolorization was achieved. Reaction kinetics has been analyzed, and the reaction followed the pseudo kinetics model with an activation energy of -484 kJ mol-1. © IWA Publishing 2019Item Cadmium sulfide nanostructures: Influence of morphology on the photocatalytic degradation of erioglaucine and hydrogen generation(Elsevier B.V., 2019) Shenoy, S.; Jang, E.; Park, T.J.; Gopinath, C.S.; Sridharan, K.Size and shape of inorganic materials are known to have great effects on their physical and chemical properties. Here, for the first time we report the visible light driven photocatalytic degradation of erioglaucine – a stable organic dye molecule in the presence of chemically synthesized nanoscale CdS with 1D (nanorods), 2D (nanosheets) and 3D (hierarchical) morphology. Visible light driven photocatalytic degradation efficiency of both 1D and 3D CdS in the removal of erioglaucine are identical. Surprisingly, with 5 min of sonication, the highly crystalline 3D CdS stacked with many thin nanowires containing numerous active surface sites exhibited four-fold enhanced photodegradation efficiency in comparison to 1D and 2D CdS. Scavenger studies revealed that electrons and superoxide radicals are primary reactive species involved in the photodegradation of erioglaucine, while cyclic photodegradation studies revealed the good stability of 3D CdS against photocorrosion. Further, the photocatalytic hydrogen evolution studies also revealed the excellent activity of 3D CdS in comparison to 1D and 2D CdS. Thus, we find that the morphology indeed influences the photocatalytic activity. These results reveal that 3D CdS nanostructures investigated in the present work are efficient photocatalysts that could be fine-tuned for both environmental remediation and hydrogen generation applications. © 2019 Elsevier B.V.Item Exploring the synergistic interactions of TiO2, rGO, and g-C3N4 catalyst admixtures in a polystyrene nanocomposite photocatalytic film for wastewater treatment: Unary, binary and ternary systems(Elsevier Ltd, 2019) Das, S.; Mahalingam, H.Reduced graphene oxide (rGO) as well as graphitic carbon nitride (g-C3N4) were synthesised and blended along with TiO2 at specific ratios in polystyrene photocatalytic films to find out the optimum efficiency. The prepared photocatalysts were characterised by scanning electron microscopy (SEM-EDX), X-ray diffraction (XRD), Fourier transform infrared spectra (FTIR) and contact angle analyser. The SEM, XRD, and FTIR analysis indicated that the nanoparticles were evenly distributed on the surface of the polystyrene film. The stability of the polymer film with respect to possible leaching of the embedded catalyst particles was evaluated by ICP-OES analysis. The photocatalytic activity of the admixture was evaluated using remazol turquoise blue dye as a model organic pollutant, and it was found that the photocatalytic ternary admixtures displayed much higher photocatalytic activity (99%) than the unary (89%) or binary (94%) mixtures indicating the synergistic effect of these catalysts. The effect of catalyst ratio, immobilisation, pH, initial dye concentration, irradiated light source, the presence of H2O2 and reusability of the film were also evaluated. The degradation of the dye is confirmed by TOC analysis (40% reduction), and HPLC/MS was used to identify the final degraded compounds. © 2019 Elsevier Ltd.Item Porous Graphene Wrapped SrTiO3 Nanocomposite: Sr-C Bond as an Effective Coadjutant for High Performance Photocatalytic Degradation of Methylene Blue(American Chemical Society service@acs.org, 2019) Bantawal, H.; Sethi, M.; Shenoy, U.S.; Bhat, D.K.Porous graphene-SrTiO3 (PGST) composite prepared by a facile solvothermal method was tested for its photocatalytic activity in degradation of methylene blue (MB) dye. First-principles density functional theory calculations were also carried out to study the effect of nanocomposite formation on the electronic structure and density of states. The combined experimental and theoretical study gave insights regarding the formation of the Sr-C bond which enhanced the charge transport, effectively separating the charge carriers and reduced their recombination rate. The formation of PGST nanocomposite favorably tuned the electronic structure with decreased band gap due to introduction of the hybridized states extending the absorption to the visible region of electromagnetic spectrum. The microscopy studies revealed loofah like PG wrapped SrTiO3 nano structures with contusions providing high surface area facilitating adsorption of MB dye. Degradation of ?92% was obtained by 7.5 PGST in 120 min with high cyclic stability indicating its suitability as an efficient photocatalyst for the treatment of pollutants. © 2019 American Chemical Society.Item Novel immobilized ternary photocatalytic polymer film based airlift reactor for efficient degradation of complex phthalocyanine dye wastewater(Elsevier B.V., 2020) Das, S.; Mahalingam, H.Reduced graphene oxide (rGO) as well as graphitic carbon nitride (g-C3N4) catalysts were synthesized and a physical admixture of rGO and g-C3N4 along with TiO2 in the ratio of 1:1:1 by weight was immobilized in a polystyrene film using the facile solvent casting method. An internal loop airlift reactor with a working volume of 1.2 litres incorporating the prepared polymer-based photocatalytic film was designed and tested for the photocatalytic degradation of remazol turquoise blue dye synthetic wastewater. The reactor parameters affecting the photocatalytic activity such as airflow rate and Di/Do (ratio of draft tube diameter to outer tube diameter) were evaluated. The successful operation of the reactor obtained using the ternary immobilized catalyst mixture film gave 92.25% total organic carbon reduction and 94% decolourization within 140 min, compared to 91% decolourization by the slurry form within 40 min. Complete and quicker decolourization of the dye was also demonstrated under the influence of O3 or H2O2. The immobilized catalyst was successfully reused four times. The ternary catalyst admixture employed in this work and the unique design of the photocatalytic reactor helps to increase the degradation rate of toxic textile effluents thus making it suitable for larger scales of treatment. © 2019 Elsevier B.V.Item Electrochemical synthesis of ZnO-WO3 nanocomposites and their photocatalytic activity(Springer editorial@springerplus.com, 2020) Goveas, J.J.; Shetty, S.; Mascarenhas, N.P.; D’Souza, R.M.; Gonsalves, R.A.Abstract: Heterometal oxide nanoparticles of ZnO-WO3 (ZWO) were synthesized using a facile dual step hybrid electrochemical–thermal technique. The role of surfactant additives during synthesis was investigated by introducing three different surfactants:Cetyltrimethyl ammonium bromide (Cetrimide), sodium dodecyl sulphate (SDS), and polyethylene glycol (PEG) into the electrolytic bath. X-ray diffraction and surface morphology studies indicate that the nanoparticles are cubic with an average crystallite size of 30–40 nm. Photocatalytic behaviour of these nanomaterials was tested using Methylene Blue (MB) and Eriochrome Black-T (EBT) as sample pollutants. The best results were observed for the photocatalyst generated in the presence of SDS as an additive and calcined at 650 ?C. High degree of decolourisation of both dyes resulting in complete mineralisation is due to the photocatalytic activity of ZWO which is greater than that of commercially obtained TiO2-P25 photocatalysts. This proves that the electrochemical synthetic route with its low cost and high efficiency is an excellent technique for the bulk synthesis of heterometal oxide photocatalysts which could effectively be used in effluent water treatment. Graphic Abstract: [Figure not available: see fulltext.]. © 2020, Springer Nature B.V.Item Design and development of TiO2 coated microflow reactor for photocatalytic partial oxidation of benzyl alcohol(Elsevier B.V., 2020) Pradhan, S.R.; Nair, V.; Giannakoudakis, D.A.; Lisovytskiy, D.; Colmenares, J.C.The synthesis of valuable organic compounds from naturally available and renewable biomass is an open field of research towards adaptation in real-life applications. Photocatalytic valorization is assumed as a potential candidate, although the lower efficiency of the traditional batch photocatalytic reactor sets some drawbacks. Recently, photocatalytic microreactors revealed as a prosperous candidate for various photocatalytic reactions, especially for selective oxidation. This area of research is challenging due to the development of the proper photocatalytic microreactor for the targeted application. Deposition of the catalyst on the internal surface of the microreactor, the sufficient utilization of the irradiation, optimization of the reaction parameters are among the most vital parameters that should be considered upon the design. Although, to obtain the most active material and tune its crucial features to maximize its catalytic performance inside the microreactors is the uppermost important part. This work introduces ultrasound-assisted TiO2 deposition on the inner walls of a perfluoroalkoxyalkane microtube under mild conditions. The deposition experiments were carried out with commercial and sol-gel synthesized TiO2. The materials were characterized by XRD, UV–vis DRS, Scanning Electron Microscopy (SEM), and nitrogen sorption. The photocatalytic activities of the TiO2 nano-engineered fluoropolymer based microreactors were evaluated for the oxidation of benzyl alcohol in flow. © 2020 The Author(s)Item Vanadium-Doped SrTiO3 Nanocubes: Insight into role of vanadium in improving the photocatalytic activity(Elsevier B.V., 2020) Bantawal, H.; Shenoy, U.S.; Bhat, D.K.SrTiO3 based materials have been gaining attention recently in the field of photocatalysis due to their tunable electronic structure. Herein, we employ a facile one pot solvothermal approach for the synthesis of V doped SrTiO3 nanocubes. First principles theoretical calculations reveal that the 3 'd' dopant level introduced by V reduces the band gap and extends the absorption to the visible region of spectrum. The occupancy of Ti site by V introduces dopant states overlapping with the conduction band, eliminating the formation of mid gap recombination centres. Photocatalytic experimental studies on degradation of methylene blue dye reveals the material to be an excellent photocatalyst with high photocorrosion resistance and cyclic stability. In addition, the material is also predicted to be a potential thermoelectric material. © 2020 Elsevier B.V.