Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
132 results
Search Results
Item Synthesis and Characterization of PVDF/Graphene Nanocomposite Membrane for Water Treatment Applications(Trans Tech Publications Ltd, 2022) Rao, S.; Avinash, A.; As, S.; Hegde, C.; Isloor, A.M.; Vinayak, V.R.Membrane technology advancement has gained momentous consideration around the globe because of their appealing highlights, such as effectiveness, low expenses, and effective solutions for longstanding issues in alchemical industries. This study expected to incorporate graphene nanoparticles into Polyvinylidene difluoride (PVDF) to form nanofiltration (NF) layers using DMF (Dimethyl formamide) as solvent via DIPS (diffusion induced phase separation) technique. PVDF polymer membrane performances with varied percent (1 – 6% wt.) of graphene concentrations are studied with Infrared spectral, water uptake, water contact angle, and ion rejection measurements. Scanning electron microscope (SEM) analysis showed that the pore size is often regulated by incorporating graphene nanoparticles (80-90 nm) as compared to PVDF membranes. The PVDF membranes exhibited a relative increase in the contact angle from PVDF to PVDF-G6%, i.e., 50.3° to 63.46 ± .3, thus, showing a relative increase in hydrophobicity. The higher percent of graphene (> 6% by wt.) results in nano-particle accumulation that showed the performances of PVDF/graphene rejection possessing relatively the same results. The results confirmed that the prepared membranes possess an excellent ability to treat wastewater. © 2022 Trans Tech Publications Ltd, Switzerland.Item Optoelectronic properties of graphene silicon nano-texture(Institute of Electrical and Electronics Engineers Inc., 2014) Brahmanandam, J.; Ajmalghan, M.; Abhilash, R.K.; Roy Mahapatra, D.; Rahman, M.R.; Hegde, G.M.Graphene on silicon with silicon dioxide quantum dots is a promising opto-electronic material. The optical band gap and the corresponding optical conductivity are estimated using the density functional approach with the combination of molecular dynamics. The regular repeating unit cell of graphene silicon nano-texture is identified using the classical molecular dynamics simulations. Electronic calculations predict the optical band gap is around 0.2 eV and the optical conductivity is identified to be 0.3 times the quantum conductance. © 2014 IEEE.Item Optoelectronic properties of graphene on silicon substrate: Effect of defects in graphene(SPIE spie@spie.org, 2015) Javvaji, B.; Ajmalghan, M.; Roy Mahapatra, D.; Rahman, M.R.; Hegde, G.M.Engineering of electronic energy band structure in graphene based nanostructures has several potential applications. Substrate induced bandgap opening in graphene results several optoelectronic properties due to the inter-band transitions. Various defects like structures, including Stone-Walls and higher-order defects are observed when a graphene sheet is exfoliated from graphite and in many other growth conditions. Existence of defect in graphene based nanostructures may cause changes in optoelectronic properties. Defect engineered graphene on silicon system are considered in this paper to study the tunability of optoelectronic properties. Graphene on silicon atomic system is equilibrated using molecular dynamics simulation scheme. Based on this study, we confirm the existence of a stable super-lattice. Density functional calculations are employed to determine the energy band structure for the super-lattice. Increase in the optical energy bandgap is observed with increasing of order of the complexity in the defect structure. Optical conductivity is computed as a function of incident electromagnetic energy which is also increasing with increase in the defect order. Tunability in optoelectronic properties will be useful in understanding graphene based design of photodetectors, photodiodes and tunnelling transistors. © 2015 SPIE.Item Structural analysis of graphene and h-BN: A molecular dynamics approach(American Institute of Physics Inc. subs@aip.org, 2016) Thomas, S.; Ajith, A.; Valsakumar, M.C.Classical molecular dynamics simulation is employed to analyze pair correlations in graphene and h-BN at various temperatures to explore the integrity of their respective structures. As the temperature increases, the height fluctuations in the out-of-plane direction of both graphene and h-BN are found to increase. The positional spread of atoms also increases with temperature. Thus the amplitude of the peak positions in the radial distribution function (RDF) decreases with temperature. It is found that FWHM of peaks in the RDF of h-BN is smaller as compared to those of graphene which implies that the structure of h-BN is more robust as compared to that of graphene with respect to their respective empirical potential. © 2016 Author(s).Item Preparation and characterization of nanoparticle blended polymers for thermal energy storage applications(American Institute of Physics Inc. subs@aip.org, 2019) Chavan, S.; Gumtapure, V.; Arumuga Perumal, D.A.This paper is concerned with the comprehensive procedure of preparing, morphological characterization and thermal property evaluation of nanoparticle blended polymer composites. Polymer composites are intended to consecrate the thermal energy storage applications. Linear low-density polyethylene (LLDPE) is incorporated with functionalized graphene with different concentrations (1, 3 and 5%). The morphological study revealed compatibility of polymer composites, at lower concentrations (1-3%,) it shows homogenous dispersion, but above threshold limit the particle distribution is non-homogenous with coarse surface structures. Higher concentration (5%) of nanoparticles emulsifies the molecules and generates micelles between themselves. The thermal conductivity of the polymer composite is significantly enhanced with the reduction of specific heat. At lower concentrations polymer exhibits homogeneous dispersion and the interfacial interaction is comparatively higher, optimal concentration (3%,) of nanoparticle provides favorable results and hence polymer composites with ideal concentration can be utilized for thermal energy storage applications. © 2018 Author(s).Item A review on thermal energy storage using composite phase change materials(Bentham Science Publishers, 2018) Chavan, S.; Gumtapure, V.; Arumuga Perumal, D.A.Background: This paper intends to provide the elementary understanding about the development of thermal energy storage systems. Reviews of storage system performance are carried out from various characterization studies, experimental work, numerical investigations and patents. Several techniques employed to enhance the thermal performance have been reviewed and discussed. Composite phase change materials are the best alternative to achieve the cost feasibility in thermal energy storage systems without compromising the storage capacity. Objective: The purpose of this study is to give an outline and history of the thermal energy storage systems and enlighten the techniques used for storage density enhancement without significant modifications in the design. Methods: In this study, three methods such as, characterization studies, experimental work, numerical investigations and patents. It also addresses many research articles and recent patents on the thermal storage systems, various techniques adopted and applications of such systems. Results: Composite phase change materials are the best alternative to achieve the cost feasibility in thermal energy storage systems without compromising the storage capacity. Carbon based nanoparticles show excellent properties in the composite phase change materials. Conclusion: Composite phase change materials have greater potential for thermal energy storage applications and especially carbon-based nanoparticles like graphene, graphene oxide, carbon nanotubes, fullerene, graphite, graphite oxide, extracted graphite etc., are greatly enhancing the thermo-physical properties of composite phase change materials. Combination of paraffin-based phase change materials and carbon-based nanoparticles can be used for the future thermal energy storage applications. © 2018 Bentham Science Publishers.Item Carbon nanotube- and graphene-based advanced membrane materials for desalination(Springer Verlag, 2017) Hebbar, R.S.; Isloor, A.M.; Siddique, I.; Asiri, A.M.The development of membrane-based desalination and water purification technologies offers new alternatives to meet the global freshwater demand. Rapid advancement in carbon nanotube-based and graphene-based nanomaterials has drawn the attention of scientific investigators on various desalination technologies. These nanomaterials indeed offer advantageous structure, size, shape, porosity and mass transport behavior for membrane separation process. This article reviews theoretical and experimental investigations of carbon nanotube- and graphene-based composite materials for desalination. Special attention is given to the simulation of molecular transport through these materials. Further, recent advances in the application of functionalization of carbon nanotube- and graphene-based materials for salt rejection and hydraulic permeation properties are discussed. © 2017, Springer International Publishing AG.Item Potential of Graphene-Functionalized Polymer Surfaces for Dental Applications: A Systematic review(Taylor and Francis Ltd., 2025) Singh, R.K.; Verma, K.; Kumar, G.C.; Jalageri, M.B.Graphene, a two-dimensional carbon nanomaterial, has garnered widespread attention across various fields due to its outstanding properties. In dental implantology, researchers are exploring the use of graphene-functionalized polymer surfaces to enhance both the osseointegration process and the long-term success of dental implants. This review consolidates evidence from in-vivo and in-vitro studies, highlighting graphene’s capacity to improve bone-to-implant contact, exhibit antibacterial properties, and enhance mechanical strength. This research investigates the effects of incorporating graphene derivatives into polymer materials on tissue response and compatibility. Among 123 search results, 14 articles meeting the predefined criteria were analyzed. The study primarily focuses on assessing the impact of GO and rGO on cellular function and stability in implants. Results indicate promising improvements in cellular function and stability with the use of GO-coated or composited implants. However, it is noted that interactions between Graphene derivatives and polymers may alter the inherent properties of the materials. Therefore, further rigorous research is deemed imperative to fully elucidate their potential in human applications. Such comprehensive understanding is essential for unlocking the extensive benefits associated with the utilization of Graphene derivatives in biomedical contexts. © 2024 Informa UK Limited, trading as Taylor & Francis Group.Item Reduced graphene oxide derived from used cell graphite and its green fabrication as an eco-friendly supercapacitor(Royal Society of Chemistry, 2014) Sudhakar, Y.N.; Muthu, M.; Bhat, D.; Senthil Kumar, S.Graphite extracted from a used primary cell was converted into reduced graphene oxide (rGO) using calcium carbonate together with rapid and local Joule heating by microwave irradiation. Electrodes were prepared by ultrasonically dispersing rGO in biodegradable poly(vinylpyrrolidone) (PVP) binder and coating this on recyclable poly(ethyleneterephthalate) (PET) sheet using a low cost screen printing technique. The use of the same polymer (PVP) as a binder, in addition to as the solid polymer electrolyte (SPE), enhances the compatibility and ionic conductivity of the hydrophobic rGO electrode in the supercapacitor system. Further, the phosphoric acid (H3PO4)-doped biodegradable SPE was screen printed for the first time on the rGO electrodes. Ionic conductivity and dielectric studies of the SPE were carried out at different temperatures and different dopant acid concentrations. The morphology, composition and structure of the graphene electrode components were characterized using Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) methods. Transmission electron microscopy (TEM) images showed a single layer or a few layers of rGO sheets and selected area electron diffraction showed the presence of slight defects. The fabricated environmentally friendly, industrially favorable and green supercapacitor showed a specific capacitance of 201 F g-1 and cyclic stability with 97% retention of the initial capacitance over 2000 cycles. Furthermore, the performance of this green supercapacitor is comparable to that of those fabricated using rGO synthesized from commercial graphite and in other literature reports. © 2014 The Royal Society of Chemistry.Item Structural health monitoring capabilities in ceramic-carbon nanocomposites(2014) Inam, F.; Badekai Ramachandra, B.R.; Vo, T.; Daoush, W.M.A novel method for analysing structural health of alumina nanocomposites filled with graphene nanoplatelets (GNP), carbon nanotubes (CNTs) and carbon black nano-particles (CB) is presented. All nanocomposites were prepared using novel colloidal processing and then by Spark Plasma Sintering. Good homogeneous dispersion was observed for all carbon filled materials. Nanocomposite bars were indented to produce sub-surface damage. Change in electrical conductivities were analysed after indentation to understand structural damage. For correlating change in electrical conductivity and indentation damage and understanding damage tolerance, mechanical properties were compared. Because of the systematically induced indentation damage, a sharp decrease of 86% was observed in the electrical conductivity of CNT nanocomposite as compared to 69% and 27% in the electrical conductivities of GNP nanocomposites and CB nanocomposites respectively. CNTs impart superior damage sensing capability in alumina nanocomposites, in comparison to GNP and CB, due to their fibrous nature, high aspect ratio and high electrical conductivity. © 2013 Elsevier Ltd and Techna Group S.r.l.