Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
5 results
Search Results
Item Understanding of synergy in non-isothermal microwave-assisted in-situ catalytic co-pyrolysis of rice husk and polystyrene waste mixtures(Elsevier Ltd, 2022) Sridevi, V.; Suriapparao, D.V.; Tukarambai, M.; Terapalli, A.; Ramesh, R.; Sankar Rao, C.S.; Gautam, R.; Moorthy, J.V.; Suresh Kumar, C.Rice husk (RH) and polystyrene (PS) wastes were converted into value-added products using microwave-assisted catalytic co-pyrolysis. The graphite susceptor (10 g) along with KOH catalyst (5 g) was mixed with the feedstock to understand the products and energy consumption. RH promoted the char yield (20–34 wt%) and gaseous yields (16–25 wt%) whereas PS enhanced the oil yield (23–70 wt%). Co-pyrolysis synergy induced an increase in gaseous yields (14–53 wt%) due to excessive cracking. The specific microwave energy consumption dramatically decreased in co-pyrolysis (5–22 kJ/g) compared to pyrolysis (56–102 kJ/g). The pyrolysis index increased (17–445) with the increase in feedstock quantity (5–50 g). The obtained oil was composed of monoaromatics (74%) and polyaromatics (18%). The char was rich in carbon content (79.5 wt%) and the gases were composed of CO (24%), H2 (12%), and CH4 (22%). © 2022 Elsevier LtdItem Effect of dry torrefaction pretreatment of the microwave-assisted catalytic pyrolysis of biomass using the machine learning approach(Elsevier Ltd, 2022) Ramesh, R.; Suriapparao, D.V.; Sankar Rao, C.S.; Sridevi, V.; Kumar, A.This study employs the Leave-One-Out cross-validation approach to build a machine-learning model using polynomial regression to predict pyro product yield through microwave-assisted pyrolysis of sawdust over KOH catalyst and graphite powder a susceptor. The determination of coefficient (R2) validates the developed models. All the developed models achieved a high prediction accuracy with R2 > 0.93, which signifies that the experimental values are in good agreement with the predicted one. The dependence of the catalyst loading and pretreatment temperature on dominating process parameters such as heating rate, pyrolysis temperature, susceptor thermal energy, and pyro products, namely bio-oil, biochar, and biogas, are explored. The yield of biochar is reduced; however, bio-oil and biogas are enhanced as the catalyst loading increased. On the other hand, increasing the temperature of pretreated sawdust decreased bio-oil and biogas yields while increasing biochar yields. Further, microwave conversion efficiency, and susceptor thermal energy increased with increased catalyst quantity and pretreatment temperatures of sawdust. It was observed that the average heating rate was increased by increasing the catalyst quantity while maintaining the same pyrolysis time until pretreatment temperatures of 150 °C were reached, after which the heating rate dropped due to the continuous microwave energy input to the system. © 2022 Elsevier LtdItem Effective electronic waste valorization via microwave-assisted pyrolysis: investigation of graphite susceptor and feedstock quantity on pyrolysis using experimental and polynomial regression techniques(Springer, 2024) Mistry, C.; Surya, D.V.; Ramesh, R.; Basak, T.; Kumar, P.S.; Sankar Rao, C.S.; Gautam, R.; Sridhar, P.; Choksi, H.; Remya, N.Waste printed circuit board (WPCB) was subjected to microwave-assisted pyrolysis (MAP) to investigate the energy and pyrolysis products. In MAP, pyrolysis experiments were conducted, and the effects of WPCB to graphite mass ratio on three-phase product yields and their compositions were analyzed. In addition, the role of the initial WPCB mass (10, 55, and 100 g) and susceptor loading (2, 22, and 38 g) on the quality of product yield was also evaluated. By using design of experiments, the effects of graphite susceptor addition and WPCB feedstock quantity was investigated. A significant liquid yield of 38.2 wt.% was achieved at 38 g of graphite and 100 g of WPCB. Several other operating parameters, including average heating rate, pyrolysis time, microwave energy consumption, specific microwave power used, and product yields, were optimized for the MAP of WPCB. Pyrolysis index (PI) was calculated at the blending of fixed quantity WPCB (100 g) and various graphite quantities in the following order: 2 g (21) > 20 g (20.4) > 38 g (19.5). The PI improved by increasing the WPCB quantity (10, 55, and 100 g) with a fixed quantity of graphite. This work proposes the product formation and new reaction pathways of the condensable compounds. GC–MS of the liquid fraction from the MAP of WPCBs without susceptor resulted in the generation of phenolic with 46.1% relative composition. The addition of graphite susceptor aided in the formation of phenolic and the relative composition of phenolics was found to be 83.6%. The area percent of phenol increased from 42.8% (without susceptor) to 78.6% (with susceptor). Without a susceptor, cyclopentadiene derivative was observed in a very high composition (~ 31 area %). © The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature 2023.Item Hospital plastic waste valorization through microwave-assisted Pyrolysis: Experimental and modeling studies via machine learning(Elsevier Ltd, 2025) Ramesh, R.; Sankar Rao, C.; Surya, D.V.; Kumar, A.The COVID-19 pandemic generated a global upsurge in hospital plastic waste (HPW) as a consequence of the widespread utilization of personal protective equipment (PPE) composed of diverse polymer materials. The constant demand for PPE worldwide led to the accumulation of substantial volumes of high-polymer-based plastic waste. To tackle this challenge, researchers delved into the conversion of HPW into valuable chemicals through a process known as microwave-assisted pyrolysis (MAP). This method entails the transformation of HPW into high-quality char and liquid oil, which can serve as a source of fuel. In this study, our primary focus was to understand how the ratio of HPW (hospital plastic waste) to susceptor weight influenced the yields and characteristics of the resulting products in the context of the MAP process. To facilitate the experimental setup, a Central Composite Design (CCD) was employed. The impact of varying HPW weights and susceptor quantities on the production of value-added products was investigated. The analysis of condensed organic vapor decomposition revealed an increase in liquid yields (73.6 wt %, 76.6 wt %, 80.7 wt %) as the graphite content increased at a constant 30 g HPW. Conversely, gas yield decreased with higher susceptor and HPW quantity. Keeping the graphite constant at 4g, the gas yield declined (32.5 wt %, 30.7 wt %, and 24.7 wt %) as HPW increased. Additionally, gas yield exhibited a drop (32.5 wt % to 18.1 wt %) with an increase in both graphite and HPW. Furthermore, the residual yield decreased (from 1.7 wt % to 1.2 wt %) with a 30 g increase in HPW. In-depth analysis incorporated machine learning techniques to understand the behavior of response variables about susceptor and HPW quantities. The optimization of the MAP process for HPW encompassed various supplementary operational parameters, including susceptor thermal energy, average heating rate, microwave energy, specific microwave power, and product yields. Moreover, the residue generated from the MAP of HPW underwent characterization through X-ray diffraction (XRD), FTIR, and BET analysis. © 2025 Elsevier LtdItem Microwave assisted catalytic co-pyrolysis of banana peels and polypropylene: experimentation and machine learning optimization(Royal Society of Chemistry, 2025) Rajpurohit, N.S.; Sinha, S.; Ramesh, R.; Sankar Rao, C.; Harshini, H.The growing accumulation of agricultural and plastic waste poses serious environmental challenges, necessitating sustainable and efficient valorization strategies. This study investigates the microwave-assisted catalytic co-pyrolysis of banana peels and polypropylene, using graphite as a susceptor and potassium hydroxide as a catalyst. Experiments were conducted by varying biomass and plastic quantities and microwave power levels to study their effects on product yields and thermal performance. The process effectively converted waste materials into valuable products, with oil yield increasing with microwave power and optimized biomass-to-plastic ratios. The rate of mass loss and heating rate were found to significantly influence overall conversion efficiency. A support vector regression (SVR) model was developed to predict yields based on input parameters, achieving a coefficient of determination ranging from 0.81 to 0.99, which demonstrates the reliability of machine learning in capturing complex thermochemical behavior. 3D plots illustrated the nonlinear effects of process variables on yields. Fourier Transform Infrared Spectroscopy (FTIR) and X-ray Diffraction (XRD) analyses of char confirmed functional groups and crystalline phases, suggesting its suitability for applications like adsorbents or catalysts. Brunauer-Emmett-Teller (BET) analysis showed multilayer adsorption, while thermogravimetric analysis (TGA) highlighted distinct thermal degradation patterns of the feedstocks. These results affirm the promise of integrating experiments with ML for efficient waste-to-energy conversion. © 2025 The Royal Society of Chemistry.