Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
2 results
Search Results
Item Carbonated aqueous media for quench heat treatment of steels(Springer New York LLC barbara.b.bertram@gsk.com, 2016) Nayak, U.V.; Pranesh Rao, K.M.P.; Pai, M.A.; Prabhu, K.N.Distilled water and polyalkylene glycol (PAG)-based aqueous quenchants of 5 and 10 vol.% with and without carbonation were prepared and used as heat transfer media during immersion quenching. Cooling curves were recorded during quenching of an inconel 600 cylindrical probe instrumented with multiple thermocouples. It was observed that the vapor stage duration was prolonged and the wetting front ascended uniformly for quenching with carbonated media. The cooling data were analyzed by determining the critical cooling parameters and by estimating the spatially dependent probe/quenchant interfacial heat flux transients. The study showed significantly reduced values of heat transfer rate for carbonated quenchants compared to quenchants without carbonation. Further, the reduction was more pronounced in the case of PAG-based carbonated quenchants than carbonated distilled water. The results also showed the dependence of heat transfer characteristics of the carbonated media on polymer concentration. The effect of quench uniformity on the microstructure of the material was assessed. © 2016, ASM International.Item A Phase Transformation Enthalpy Parameter for Modeling Quench Hardening of Steels(Springer, 2024) Samuel, A.; Pranesh Rao, K.M.P.; Prabhu, K.N.The effect of phase transformations on the steel/quenchant interfacial heat flux during quench hardening heat treatment is investigated in the present work. Experimental and modeling approaches comprising the inverse heat conduction problem (IHCP) were employed to analyze the thermal behavior of different steel grades with varying section thicknesses. The results revealed that phase transformation led to a distinctive pattern of the interfacial heat flux, characterized by a dip and subsequent rise. We observed that increasing the section thickness increases the surface heat flux for stainless steel probes without phase transformation. In contrast, the surface heat flux decreased with thicker sections in phase transformation. The increased heat evolved due to the latent heat liberation during phase transformation, and a reduction in thermal diffusivity due to increased specific heat caused a fall in the heat flow rates. Furthermore, the study proposed a phase transformation enthalpy parameter (ΔQ) to access the enthalpy change during quenching. ΔQ was consistent for a specific steel grade and independent of section thickness but varied with the cooling rate or quench media. The incorporation of phase transformation in the quenching heat transfer model is complex due to the required material data, including TTT/CCT diagrams and thermophysical properties that vary with steel grade. The study suggests directly incorporating the ΔQ values into the heat conduction equation or the IHCP model with phase transformation, simplifying the simulation process and minimizing data inputs. A database on ΔQ as a function of temperature and cooling rate would facilitate heat transfer modeling during quench hardening. © 2023, The Minerals, Metals & Materials Society and ASM International.