Faculty Publications

Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736

Publications by NITK Faculty

Browse

Author: search.filters.author.Nityananda Shetty, A.N.Subject: search.filters.subject.anion

Search Results

Now showing 1 - 5 of 5
  • No Thumbnail Available
    Item
    A rapid extractive spectrophotometric determination of copper(II) in environmental samples, alloys, complexes and pharmaceutical samples using 4-N,N(dimethyl)amino]benzaldehyde thiosemicarbazone
    (2011) Karthikeyan, J.; Naik, P.P.; Nityananda Shetty, A.N.
    4-[N,N-(Dimethyl)amino]benzaldehyde thiosemicarbazone (DMABT) is proposed as an analytical reagent for the extractive spectrophotometric determination of copper(II). DMABT forms yellow colored complex with copper(II) in the pH range 4.4-5.4. Beer's law is obeyed in the concentration range up to 4.7 ?g mL -1. The optimum concentration range for minimum photometric error as determined by Ringbom plot method is 1.2-3.8 ?g mL-1. The yellowish Cu(II)-DMABT complex shows a maximum absorbance at 420 nm, with molar absorptivity of 1.72 × 104dm3 mol-1 cm-1 and Sandell's sensitivity of the complex obtained from Beer's data is 0.0036 ?g cm-2. The composition of the Cu(II)-DMABT complex is found to be 1:2 (M/L). The interference of various cations and anions in the method were studied. Thus the method can be employed for the determination of trace amount of copper(II) in water, alloys and other natural samples of significant importance. © 2010 Springer Science+Business Media B.V.
  • No Thumbnail Available
    Item
    Dual colorimetric receptor with logic gate operations: Anion induced solvatochromism
    (Royal Society of Chemistry, 2014) Kigga, M.; Swathi, N.; Manjunatha, J.R.; Das, U.K.; Nityananda Shetty, A.N.; Trivedi, D.R.
    A receptor R1 was designed and synthesised for colorimetric detection of F- ions as well as Cu2+ ions via intramolecular charge transfer mechanism. Upon addition of F- ions in dry DMSO, the color of the receptor R1 changed from pale yellow to blue. The receptor showed a unique property of solvatochromism by displaying different coloration with different solvents only in the presence of F- ions, which were applied to determine the percentage composition of binary solvent mixtures. The receptor R1 was able to detect Cu2+ ions colorimetrically where it exhibited a color change from pale yellow to orange-red. In addition, the receptor was subjected to molecular logic gate applications, wherein it showed 'ON-OFF' switching operations. © 2014 The Royal Society of Chemistry and the Centre National de la Recherche Scientifique.
  • No Thumbnail Available
    Item
    Colorimetric differentiation of arsenite and arsenate anions using a bithiophene sensor with two binding sites: DFT studies and application in food and water samples
    (Royal Society of Chemistry, 2024) K, K.; Nityananda Shetty, A.N.; Trivedi, D.R.
    Chemosensor N7R1 with two acidic binding sites was synthesized, and the ability of the sensor to differentiate arsenite and arsenate in the organo-aqueous medium was evaluated using colorimetric sensing methods. N7R1 distinguished arsenite with a peacock blue color and arsenate with a pale green color in a DMSO/H2O (9 : 1, v/v) solvent mixture. The specific selectivity for arsenite was achieved in DMSO/H2O (7 : 3, v/v). The sensor demonstrated stability over a pH range of 5 to 12. The computed high binding constant of 9.3176 × 1011 M−2 and a lower detection limit of 11.48 ppb for arsenite exposed the chemosensor's higher potential for arsenite detection. The binding mechanism with a 1 : 2 binding process is confirmed using UV-Vis and 1H NMR titrations, electrochemical studies, mass spectral analysis and DFT calculations. Practical applications were demonstrated by utilizing test strips and molecular logic gates. Chemosensor N7R1 successfully detected arsenite in real water samples, as well as honey and milk samples. © 2024 The Royal Society of Chemistry.
  • No Thumbnail Available
    Item
    Selective Chromogenic Chemosensors for Arsenite Anion: A Facile Approach to Analyzing Arsenite in Honey, Milk, and Water Samples
    (John Wiley and Sons Inc, 2024) K, K.; Nityananda Shetty, A.N.; Trivedi, D.R.
    In this study, two chemosensors, N5R1 and N5R2, based on 5-(4-nitrophenyl)-2-furaldehyde, with varying electron-withdrawing groups, were synthesized and effectively employed for the colorimetric selective detection of arsenite anions in a DMSO/H2O solvent mixture (8 : 2, v/v). Chemosensors N5R1 and N5R2 exhibited a distinct color change upon binding with arsenite, accompanied by a spectral shift toward the near-infrared region (??max exceeding 200 nm). These chemosensors established stability between a pH range 6–12. Among them, N5R2 displayed the lowest detection limit of 17.63 ppb with a high binding constant of 2.6163×105 M?1 for arsenite. The binding mechanism involved initial hydrogen bonding between the NH binding site and the arsenite anion, followed by deprotonation and an intramolecular charge transfer (ICT) mechanism. The mechanism was confirmed through UV and 1H NMR titrations, cyclic voltammetric studies, and theoretical calculations. The interactions between the sensor and arsenite anions were further analyzed using global reactivity parameters (GRPs). Practical applications were demonstrated through the utilization of test strips and molecular logic gates. Real water samples, honey, and milk samples were successfully analyzed by both chemosensors for the sensing of arsenite. © 2024 Wiley-VCH GmbH.
  • No Thumbnail Available
    Item
    Selective chromogenic nanomolar level sensing of arsenite anions in food samples using dual binding site probes
    (Elsevier Ltd, 2025) K, K.; Nityananda Shetty, A.N.; Trivedi, D.R.
    In the present study, two chromogenic probes, N7R2 and N7R3, each containing two binding sites, were designed and synthesized for the selective detection of arsenite in DMSO/H2O (1:1, v/v). The probes exhibited stability across a pH range spanning from 5 to 12. The lower detection limits of 2.01 ppb (18.86 nM) for N7R2 and 1.79 ppb (16.75 nM) for N7R3, which are much lower than the WHO recommended permissible limit of arsenite, confirmed the superior efficiency of the probes in detecting arsenite. The detection mechanism for arsenite was proposed through UV and 1H NMR titrations, electrochemical studies, and DFT calculations. Practical applications were demonstrated through the fabrication of test strips and molecular logic gates. The probes efficiently recognized arsenite in real water, honey, milk samples, and fruit/vegetable juices. Both N7R2 and N7R3 exhibited excellent recovery rates in the analysis of food samples, demonstrating the probes' usefulness in real sample analysis. © 2024