Faculty Publications

Now showing 1 - 3 of 3

Performance score based multi-objective optimization for thermal design of partially filled high porosity metal foam pipes under forced convection
(Elsevier Ltd, 2022) Jadhav, P.H.; Trilok, G.; Gnanasekaran, N.; Mobedi, M.
Optimization study in flow through metal foams for heat exchanging applications is very much essential as it involves variety of fluid flow and structural properties. Moreover, the identification of best combinations of structural parameters of metal foams for simultaneous improvement of heat transfer and pressure drop is a pressing situation. In this work, six different metal foam configurations are considered for the enhancement of heat transfer in a circular conduit. The foam is aluminum with PPI varying from 10 to 45 and almost the same porosity (0.90-0.95). The aluminum foams are chosen from the available literature and they are partially filled in the conduit to reduce the pressure drop. For a constant heat flux condition, the goal is to find out the efficient metal foam and configurations when air is considered as a working fluid. A special attention is paid to the preference between pressure drop and heat transfer enhancements. That is why TOPSIS optimization techniques with five different criteria (contains the combination of the weightage/priority of heat transfer and pressure drop) is used. Based on the numerical results of heat and fluid flow in conduit, it is found that when an equal importance is given to both heat transfer and friction effect, 30 PPI aluminum foam with 80% filling on the inner lateral of the pipe provides the best score as 0.8197. The best configuration and PPI for different preferences between friction and heat transfer enhancements is discussed in details. The Reynolds number varies from 4500 to 16500. © 2021 Elsevier Ltd
Correlations and Numerical Modeling of Stacked Woven Wire-Mesh Porous Media for Heat Exchange Applications
(MDPI, 2022) Trilok, G.; Srinivas, K.E.S.; Harikrishnan, D.; Gnanasekaran, N.; Mobedi, M.
Metal foams have gained attention due to their heat transfer augmenting capabilities. In the literature, correlations describing relations among their morphological characteristics have successfully been established and well discussed. However, collective expressions that categorize stacked wire mesh based on their morphology and thermo-hydraulic expressions required for numerical modeling are less explored in the literature. In the present study, cross relations among the morphological characteristics of stacked wire-mesh were arrived at based on mesh-size, wire diameter and stacking type, which are essential for describing the medium and determining key input parameters required for numerical modeling. Furthermore, correlation for specific surface area, a vital parameter that plays a major role in interstitial heat transfer, is provided. With the arrived correlations, properties of stacked wire-mesh samples of orderly varied mesh-size and porosity are obtained for various stacking scenarios, and corresponding thermo-hydraulic parameters appearing in the governing equations are evaluated. A vertical channel housing the categorized wire-mesh porous media is numerically modeled to analyze thermal and flow characteristics of such a medium. The proposed correlations can be used in confidence to evaluate thermo-hydraulic parameters appearing in governing equations in order to numerically model various samples of stacked wire-mesh types of porous media in a variety of heat transfer applications. © 2022 by the authors. Licensee MDPI, Basel, Switzerland.
Reconciliation of wire woven mesh porous media in controlling the desired heat transfer and pressure drop
(Emerald Publishing, 2025) Trilok, T.; Gnanasekaran, N.; Mobedi, M.
Purpose: Despite the reputation of the metal-based porous media for their ability to augment heat transfer as widely witnessed in the literature and practically operating heat exchanging applications, the coexisting penalty of the increased pressure drop demanding increased pumping power poses a major concern that invites the need for an alternate solution to handle this unsought outcome. Therefore, this study aims at providing a better solution to the existing cost and benefit scenarios to benefit a plethora of engineering applications including energy transfer, energy storage and energy conversion. Design/methodology/approach: This work highlights on the property of stacked woven wire mesh porous media such as their stacking types, porous conditions and thickness scenarios that can potentially result in distinct trade-off scenarios. A vertical channel is numerical modelled by using REV scaled modelling technique using Darcy-Forchheimer and local thermal non-equilibrium models to illustrate the possibilities of this variety of trade off scenarios between the desirable heat transfer and the unsought flow resistance. Findings: This work illustrates the advantages of wire mesh-based porous medium and its distinct potential in controlling the existing trade-offs between the cost and benefit aspects. It is found that by varying the features of wire mesh porous media, the interplay between the conflictingly existing characteristics can be much easily handled specific to distinct requirements associated with variety of engineering applications. Originality/value: The study emphasizes on a new solution or methodology to handle the penalty of pressure drop associated with metal-based porous media. Through this study, a novel approach to control the ultimately costing pumping power at the benefit of increased heat transfer is provided considering various requirements that could be associated with any thermal management systems. Various possibilities and potentials of wire mesh porous media are illustrated highlighting on their benefit of ease with which the mentioned goals can be achieved. © 2024, Emerald Publishing Limited.

Faculty Publications

Browse

Filters

Settings

Sort By

Results per page

Search Results