Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
4 results
Search Results
Item Optimum selection of phase change material for solar box cooker integrated with thermal energy storage unit using multi-criteria decision-making technique(Elsevier Ltd, 2021) Anilkumar, B.C.; Maniyeri, R.; Anish, S.Various thermal energy storage (TES) materials are used to increase the efficacy of solar cooker in off-sun hours. For the past few decades, phase change materials (PCMs) used as heat storage medium have become research interest. Selection of optimum PCM is important for the effective and efficient heat storage. Therefore, the main objective of the current study is to select the optimum PCM among the alternatives to be used for TES unit incorporated in solar box cooker (SBC). The PCMs are pre-screened among the alternatives used in earlier works based on the melting temperature. The optimum PCM is then selected with the aid of different multi-criteria decision -making (MCDM) techniques like TOPSIS, EDAS and MOORA. The criteria weights required for the optimization algorithm is found by using AHP, ENTROPY and CRITIC methods. Also, compromised values between the weights obtained through these methods are computed. The optimization algorithms are solved using MATLAB. The results of all MCDM techniques show that erythritol is the best alternative for the TES medium incorporated in the SBC. Further, the optimum mass of PCM and dimensions of the TES unit required for the SBC to operate during sun down hours for some specific duration is calculated by using a simple iterative solver developed with MATLAB. There is good agreement between the computational procedure and experimental study using paraffin wax as the TES medium. The iterative solution procedure also selects erythritol to be the best alternative as it required lesser quantity compared with other PCMs. Therefore, we recommend erythritol as the best PCM for the SBC incorporated with TES unit. © 2021Item Modified thermal energy storage unit for solar cookers using iterative design algorithm(Elsevier Ltd, 2022) Anilkumar, B.C.; Maniyeri, R.; Anish, S.The use of phase change materials (PCMs) as thermal energy storage (TES) mediums has gained notable attention in recent years due to their high energy density and constant temperature characteristics which makes them suitable for solar cookers (SCs). Therefore, the primary objective of this study is to develop a modified TES unit containing PCM as heat storage medium incorporated with cooking vessel for SCs. The TES units use PCM filled on all sides, including the lid, enhancing heat transfer to food load. The design of TES unit is carried out by developing computational procedure. MATLAB code is written to implement the iterative procedure, simplifying exhaustive calculations required for optimizing and designing the TES unit. The present work also aims to design, fabricate and test different geometries of TES units using paraffin wax as the PCM. After six hours, cooking load temperature in all geometries of TES units reached the melting point of PCM. TES units with cylindrical shapes perform best among hexagon and square designs. Through computational procedure, cylindrical configuration is the best as it takes least amount of PCM to keep steady temperature over a specific period. Based on the computational procedure developed in this study, TES container will be designed to enhance SC performance during sundown hours and maximize the use of latent heat stored within the PCM. © 2022Item AN ITERATIVE ALGORITHM FOR DESIGNING AND SCALING OF PARABOLIC TROUGH COLLECTOR BASED SOLAR AGRO-DRYING SYSTEM(Begell House Inc., 2025) Kabeer, V.P.A.; Maniyeri, R.; Anish, S.This work proposes a simple and robust iterative algorithm for designing and scaling an indirect solar agro-drying system, which harvests thermal energy for drying using a parabolic trough collector (PTC). Separate computational procedures are developed for the design of the PTC by considering receiver tubes with and without a glass envelope. The computational procedure starts with the total heat requirement in the drying chamber and considers various heat losses and heat loss coefficients for the PTC receiver tube. The equations for various modes of heat losses in receiver tubes with and without a glass envelope are identified and formulated. Using thermal network and heat balance analysis, the expressions for various heat losses and overall heat loss coefficient are formulated in both cases. Required aperture area for the reflector surface of the PTC can be obtained in terms of overall heat loss coefficient and the collector heat removal factor. The tedious equations involved in computational procedure are solved using an iterative algorithm by developing a code in MATLAB. The results obtained from parametric analysis conducted using computational procedure reveals that heat losses and area of PTC required for providing drying thermal energy will be more if the receiver tube of PTC is without glass cover. The iterative algorithm described here can be used to optimize the design parameters and thus helps researchers in designing and sizing the components required for drying agro-based products. The algorithm will also help to scale the size of PTC and drying chamber based on the quantity and item to be dried. © 2025 by Begell House, Inc.Item Design of thermal energy storage system for solar cooker: a review(Springer, 2025) Anilkumar, B.C.; Maniyeri, R.Solar cooking has been a research focus worldwide over the last few decades due to its numerous advantages, such as no running costs, non-polluting nature and ample availability. Solar cookers incorporate thermal energy storage (TES) units to enable cooking during off-sunshine hours. Within solar thermal applications, latent heat storage materials (LHSMs), particularly phase change materials (PCMs) are increasingly vital due to their superior energy storage density and isothermal working properties. The present review aims to provide a comprehensive overview of various TES unit designs integrated with cooking vessels for solar cookers. We discuss different types of solar cookers, various TES unit configurations, and the thermo-physical properties of heat storage materials. A key aspect of this work involves comparing the sizes of various TES units, derived from our previously developed computational scheme, with existing research. Prior studies often lacked specifics on the duration of off-sunshine cooking. However, determining the optimal PCM mass is crucial for designing efficient LHS units that maximize heat storage and release for sustained cooking. To address this gap, we employed a computational procedure to determine the duration for which various LHS units, integrated with box-type solar cookers, can maintain a constant cooking temperature. We also identified and compared the dimensions of containers needed to hold the optimum PCM mass. Our computational findings for the outer vessel diameter of LHS units align closely with previous studies. This computational approach offers a robust methodology for developing TES units that optimize PCM latent heat utilization, significantly enhancing solar cooker performance during sundown hours. Ultimately, we propose a pathway for improving future TES unit designs and present a strategy for marketing solar cookers. This review will be an invaluable resource for researchers, stimulating further advancements in solar cookers integrated with TES systems. © Indian Academy of Sciences 2025.