Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
5 results
Search Results
Item A comprehensive review on material selection for polymer matrix composites subjected to impact load(China Ordnance Industry Corporation, 2021) Mahesh, V.; Joladarashi, S.; Kulkarni, S.M.Polymer matrix composites (PMC) are extensively been used in many engineering applications. Various natural fibers have emerged as potential replacements to synthetic fibers as reinforcing materials composites owing to their fairly better mechanical properties, low cost, environment friendliness and biodegradability. Selection of appropriate constituents of composites for a particular application is a tedious task for a designer/engineer. Impact loading has emerged as the serious threat for the composites used in structural or secondary structural application and demands the usage of appropriate fiber and matrix combination to enhance the energy absorption and mitigate the failure. The objective of the present review is to explore the composite with various fiber and matrix combination used for impact applications, identify the gap in the literature and suggest the potential naturally available fiber and matrix combination of composites for future work in the field of impact loading. The novelty of the present study lies in exploring the combination of naturally available fiber and matrix combination which can help in better energy absorption and mitigate the failure when subjected to impact loading. In addition, the application of multi attributes decision making (MADM) tools is demonstrated for selection of fiber and matrix materials which can serve as a benchmark study for the researchers in future. © 2020 The AuthorsItem Tribo-mechanical characterization and optimization of green flexible composites(ICE Publishing, 2020) Mahesh, V.; Joladarashi, S.; Kulkarni, S.M.The use of natural fibers as a substitute for synthetic fibers as reinforcement in polymer-based composites is finding prominence nowadays. The present paper deals with the comparative study of biodegradable flexible composites fabricated using jute fabric and rubber with different configurations-namely, jute/rubber/jute (JRJ), jute/rubber/rubber/jute (JRRJ) and jute/rubber/jute/rubber/jute (JRJRJ)-using their tribo-mechanical properties as the attributes and making use of a multi-attribute decision making (MADM) approach-namely, technique for order of preference by similarity to ideal solution (Topsis). The tensile strength, tear strength, interlaminar shear strength and specific wear rate of the proposed composites are chosen as the attributes for comparison using Topsis. The results show that JRJRJ is the best configuration among the considered configurations of flexible composites, providing the overall best tribo-mechanical properties, and the fractography study shows that the proposed flexible composites undergo failure mainly due to matrix tearing in the case of tensile and tear tests as opposed to matrix cracking in the case of stiff composites. Also, the wear study reveals that rubber exhibits better resistance to wear. This study shows the efficient application of the statistically based MADM tool Topsis for material selection. © 2020 ICE Publishing: All rights reserved.Item Investigation of mechanical properties of luffa fibre reinforced natural rubber composites: Implications of process parameters(Elsevier Editora Ltda, 2024) Gurjar, A.K.; Kulkarni, S.M.; Joladarashi, S.; Doddamani, S.Natural fiber-reinforced composite materials are highly beneficial due to their excellent strength-to-weight ratio, and the compression molding process is frequently used to prepare natural fiber composites. The primary objective of the present work is to optimize the process parameters of the compression molding method to prepare luffa fiber-reinforced natural rubber composite and investigate the influence of process parameters on mechanical properties. Pre-processing parameters, specifically oven-dry temperature and time, processing parameters such as soaking temperature, time, and compression pressure, and post-processing parameters, such as oven-dry temperature and time, were considered to optimize. Natural rubber in its latex phase is utilized as a matrix material, and luffa fiber is used as reinforcement. The Plackett-Burman screening design technique was employed to identify the impact of different processing parameters on the mechanical properties of the luffa fiber-reinforced natural rubber (LNR) composite, and based on Taguchi's design of experiments, several process parameters were utilized to create L27 orthogonal array and the mentioned composites prepared accordingly. The ASTM standard is followed while testing the composite samples to determine their density, shore A hardness, and tensile strength. The density of the composite is unaffected by the process parameters; however, the shore A hardness of the composite is significantly affected. All the processing parameters most significantly impacted the tensile strength of LNR composites. The optimized process parameters for preparing LNR composite are the pre-oven temperature of 65 °C and time of 150min, the soaking temperature of 75 °C and time of 5min, compression pressure of 1.5 MPa, and the post-oven dry temperature of 55 °C and time of 45min. LNR composite can absorb energy due to its rubber matrix, making it useful for high-impact applications. © 2024 The AuthorsItem Experimental and numerical investigation on the elastic properties of luffa–cenosphere-reinforced epoxy hybrid composite(John Wiley and Sons Inc, 2024) Gurjar, A.K.; Kulkarni, S.M.; Joladarashi, S.; Doddamani, S.Estimating the elastic characteristics of natural fiber-reinforced polymer composites such as luffa fiber reinforced with epoxy is challenging. The structure of luffa cylindrica is complex, like a three-dimensional natural fibrous mat, netting-like structure. The multiscale modeling of such structures is the challenge to be addressed. The prime objective of this work is to determine the specific elastic properties of luffa–cenosphere-reinforced epoxy (LCE) composite, considering the effect of filler volume fractions. Furthermore, multiscale modeling techniques, such as representative volume elements (RVEs) of finite element techniques with chopped, unidirectional, plain, and twill weaving fiber arrangements, were employed. The longitudinal modulus, transverse modulus, shear modulus, and Poisson's ratio were predicted through these modeling approaches. However, experimental and analytical methodologies, including the rule of mixture and Halpin–Tsai, were considered to validate the finite element analysis results. The elastic characteristics of LCE composite were therefore shown to be enhanced by increasing filler volume fraction. However, the cenosphere's 20% volume fraction has the highest elastic properties as determined by analytical, experimental, and computational models. Analytical and finite element simulation results were compared with the experimental results, and based on the findings, the most suitable (unidirectional, chopped, plain, and twill weaving) RVE was identified for finite element modeling of LCE composite for the evaluation of elastic properties. Results from practical approaches and the RVE twill weaving model showed good agreement, with less than 1% error, compared to the other analytical and finite element methods. Highlights: NFCs are gaining ground in polymer composites. Overcoming challenges in modeling of luffa fiber inside epoxy matrix. The study uses multiscale modeling with diverse fiber arrangements. Experimental and analytical methods used to confirm FEA results. Increased cenosphere volume fraction boosts LCE composite properties. © 2024 Society of Plastics Engineers.Item Experimental and Numerical Investigation of the Performance of Luffa Fiber-Reinforced Natural Rubber Composites with Process Parameter Optimization using DOE(Korean Fiber Society, 2025) Gurjar, A.K.; Kulkarni, S.M.; Joladarashi, S.; Doddamani, S.Composite materials have gained significant attention due to their high strength-to-weight ratio and sustainability. In particular, natural fiber-reinforced composites are increasingly investigated as environmentally friendly alternatives to synthetic counterparts. This study focuses on fabricating lightweight and biodegradable luffa fiber-reinforced natural rubber (LNR) composites using compression molding, emphasizing optimizing key processing parameters—temperature, curing time, and compression pressure. Latex-form natural rubber was selected as the matrix owing to its biodegradability, low cost, and compatibility with natural fibers. In contrast, luffa fiber served as reinforcement due to its favorable mechanical properties. The Design of Experiments (DOE) approach, specifically Taguchi’s method, was employed to systematically analyze the influence of processing parameters on physical and mechanical performance. Experimental evaluation of mechanical properties was conducted according to ASTM standards. The rule of mixture was used to evaluate the mechanical properties analytically. The multiscale material modeling finite element (FEM) methods were used to assess the orthotropic properties using the representative volume element technique. Results showed that density was only marginally affected by processing conditions, with ROM and FEM generally overestimating values; however, FEM provided closer agreement to experimental data. Shore A hardness and longitudinal modulus highly depended on curing temperature and time, with optimal properties obtained at 100 °C for 15 min under 1.0 MPa pressure. Similarly, the maximum ultimate tensile strength (0.40 MPa) was achieved under the same conditions, attributed to enhanced fiber–matrix bonding and crosslinking. Statistical analysis (ANOVA) confirmed temperature as the most influential parameter, followed by pressure and curing time. Optimized processing conditions significantly improved fiber–matrix adhesion, resulting in superior mechanical performance. These findings provide reliable processing guidelines for developing high-performance, environmentally sustainable LNR composites, making them suitable for high-impact applications in defense and consumer sectors. © The Author(s), under exclusive licence to the Korean Fiber Society 2025.