Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
2 results
Search Results
Item Vibration and stability characteristics of functionally graded sandwich plates with/without porosity subjected to localized edge loadings(Taylor and Francis Ltd., 2023) Swaminathan, K.; Hirannaiah, S.; Rajanna, T.This article investigates the influence of porosity and localized edge loads on the vibration and buckling characteristics of functionally graded material (FGM) plates using the finite element (FE) method. The analysis is carried out by choosing a single-layer FGM and two different types of FGM sandwich plates in such a way that there is no material discontinuity along the thickness direction. The porosity imperfections are accounted for in this study as criteria of stiffness reduction and are incorporated using modified power law distribution. The vibration and buckling responses are studied by considering four types of localized edge loads on plates with different porosity distributions. The application of different types of localized edge loads on the plate leads to the development of nonuniform in-plane stresses. Hence, they are computed first by using a dynamic approach before obtaining the buckling loads. The accuracy of the FE formulation is first validated for FGM plates by comparing the natural frequencies and the critical buckling loads obtained in the present investigation with the solutions already available in the literature. After validating the accuracy, detailed parametric studies have been performed on plates with varying volume fraction exponent, porosity distribution, porosity index, side-to-thickness ratio, load width ratio, aspect ratio, and support condition, and the results are presented with appropriate conclusions. A probabilistic sensitivity analysis is carried out to identify the significant parameter affecting the buckling load and natural frequency of porous FGM plates subjected to localized edge loads, which considerably aids in the design of the FGM plates. © 2022 Taylor & Francis Group, LLC.Item EFG meshless-ANN approach for free vibration analysis of functionally graded material plates on elastic foundation in thermal environments(Taylor and Francis Ltd., 2025) K P, A.; Swaminathan, K.; Hirannaiah, S.; Pavan, G.S.This study focuses on free vibration analysis of functionally graded material (FGM) plates supported by Winkler–Pasternak elastic foundation in thermal environment using element-free Galerkin (EFG) meshless method. Plate kinematics depend on first-order shear deformation theory. Uniform, linear, and nonlinear temperature variations through the thickness direction are considered, along with the temperature-dependent material properties. The numerical outcomes obtained from EFG method are compared with those available in the published literature to validate the proposed method’s accuracy. An artificial neural network (ANN) model that can easily predict the natural frequencies of the plate is constructed from the EFG method outcomes. Further, the effect of foundation parameters, power law index, thickness ratio, temperature variations, and different boundary conditions are investigated; results show that these significantly influence the vibration response of FGM plates supported by the elastic foundation. Increasing the temperature of FGM plates supported by the Winkler–Pasternack foundation causes a decrease in the dimensionless fundamental natural frequency, and the uniform temperature influence is greater than that of linear and nonlinear temperature variation. The proposed EFG-ANN prediction model saves approximately 98.80% computation time when predicting the natural frequency with an accuracy of approximately 98.76% compared to that by EFG meshless method alone. © 2024 Taylor & Francis Group, LLC.