Vibration and stability characteristics of functionally graded sandwich plates with/without porosity subjected to localized edge loadings

Abstract

This article investigates the influence of porosity and localized edge loads on the vibration and buckling characteristics of functionally graded material (FGM) plates using the finite element (FE) method. The analysis is carried out by choosing a single-layer FGM and two different types of FGM sandwich plates in such a way that there is no material discontinuity along the thickness direction. The porosity imperfections are accounted for in this study as criteria of stiffness reduction and are incorporated using modified power law distribution. The vibration and buckling responses are studied by considering four types of localized edge loads on plates with different porosity distributions. The application of different types of localized edge loads on the plate leads to the development of nonuniform in-plane stresses. Hence, they are computed first by using a dynamic approach before obtaining the buckling loads. The accuracy of the FE formulation is first validated for FGM plates by comparing the natural frequencies and the critical buckling loads obtained in the present investigation with the solutions already available in the literature. After validating the accuracy, detailed parametric studies have been performed on plates with varying volume fraction exponent, porosity distribution, porosity index, side-to-thickness ratio, load width ratio, aspect ratio, and support condition, and the results are presented with appropriate conclusions. A probabilistic sensitivity analysis is carried out to identify the significant parameter affecting the buckling load and natural frequency of porous FGM plates subjected to localized edge loads, which considerably aids in the design of the FGM plates. © 2022 Taylor & Francis Group, LLC.