Faculty Publications

Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736

Publications by NITK Faculty

Browse

Author: search.filters.author.Das, A.K.Subject: search.filters.subject.Compression testing

Search Results

Now showing 1 - 2 of 2
  • No Thumbnail Available
    Item
    Flexural and fracture performance of fiber reinforced self compacting alkali activated concrete– A DOE approach
    (Elsevier B.V., 2024) Prakash, G.B.; Prashanth, M.H.; Narasimhan, M.C.; Mahendra, K.; Das, A.K.
    Owing to their much-reduced carbon footprint and lower embodied energy, compared to conventional Portland Cement (OPC-based) Concrete mixes, Alkali Activated Concrete (AAC) mixes represent a pivotal advancement towards achieving sustainability goals. The fracture properties were investigated using Three-Point Bending Tests (3-PBT) under the mode I failure mechanism. This study utilises Taguchi analysis to analyse and optimise Self-Compacting Alkali-Activated Concrete (SAAC), focusing mainly on its flexural strength and fracture characteristics. An L-16 orthogonal array of experiments with three input parameters − replacement of Blast Furnace Slag (BFS) with Fly ash (FA) (0 %, 30 %, 40 %, and 50 %), Steel Fibers (SF) volume content (0 %, 0.25 %, 0.5 % and 0.75 %) and Notch to Depth (a0/d) ratio (0.2,0.3,0.4 and 0.5), at four levels each, was adopted. The Work of Fracture Method (WFM) and Double K Fracture Criterion (DKFC) were utilised to determine the Fracture Energy (GF) and fracture toughness, respectively. The results obtained from all the sixteen mixes showed that the F0-S0.75-N0.5 mix demonstrated better values in several parameters, such as flexural strength of 7.82 MPa,KICini of 0.928 MPa√m, KICuns of 6.99 MPa√m and KICini/ KICuns of 0.133. A maximum GF of 2350 N/m was obtained with F50-S0.75-N0.2 mix. However, all the inferior values of these parameters were observed with F50-S0-N0.5 mix, which recorded a flexural strength of 4.90 MPa, KICini of 0.612 MPa√m,KICuns of 1.16 MPa√m, KICini/ KICuns of 0.528 and GF of 125 N/m. Through Taguchi analysis, the optimal combination for flexural strength was identified as FA 0 %, SF 0.75 %, and a0/d 0.5 and for both Initial Fracture Toughness (KICini) and Unstable Fracture Toughness (KICuns) at FA 0 %, SF 0.75 % and a0/d 0.4. For both the ratio of initial to unstable fracture toughness (KICini/ KICuns) and fracture energy (GF), the optimum combination was FA 0 %, SF 0.75 % and a0/d 0.2. Furthermore, the results indicate that FA significantly influences KICini, while SF predominantly affects all other parameters. The predictive performance of the regression equations demonstrates good agreement with experimental outcomes. © 2024 Elsevier Ltd
  • No Thumbnail Available
    Item
    Experimental investigation and optimization of one-part alkali-activated self-compacting concrete mixes
    (Elsevier Ltd, 2024) Mahendra, K.; Narasimhan, M.C.; Prakash, G.B.; Das, A.K.
    Emphasizing the growing importance of sustainability, alkali-activated materials (AAMs) have emerged as a revolutionary alternative for cement in the construction sector. This study delves into the fresh, mechanical, and microstructural properties of One-Part Alkali-activated Self-compacting Concrete (OPASC) mixes. While mixtures of Ground Granulated Blast Furnace Slag (GGBFS) and Fly Ash (FA) were utilized as the precursors, powdered sodium metasilicate was employed to function as the activator. To streamline experimental design and reduce the economic demands of extensive testing, the Taguchi-Grey Relational Analysis (GRA) was utilized to identify optimal multi-response parameter levels. This method considered binder content (B) within a range of 700–800 kg/m³, water-to-binder (W/B) ratios between 0.38 and 0.42, and Na2O percentages from 5 % to 7 % as key input variables. Results indicated that the designed mixes recorded workability values satisfying the EFNARC guidelines, compressive strengths greater than 60 MPa, split-tensile strengths in the range of 3.5–4.6 MPa, and flexural strengths varying between 5.5 and 7.2 MPa. The mix parameters for the optimal mix, with the highest mean grey relational grade, were identified from the Taguchi-GRPA approach as B = 750 kg/m3, W/B = 0.4, and N = 6 %. Microstructural analysis revealed the formation of C/N-A-S-H type gels, which are instrumental in developing a compact matrix enhancing the mechanical properties. A good agreement between actual experimental results obtained for a different set of verification mixes with those predicted by regression-equations confirmed the potency of the Taguchi-GRA approach in optimizing the OPASC mix parameters. © 2024 The Authors