Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
14 results
Search Results
Item Characterization of poly(ethylene-co-vinyl acetate-co-carbon monoxide)/layered silicate clay hybrids obtained by melt mixing(2011) Anandhan, S.; Patil, H.G.; Babu, R.R.In recent times, polymer-layered silicate nanocomposites have drawn a great deal of attention because they often exhibit tremendous improvements in material properties compared with virgin polymers or conventional microor macro-composites. In the present study, nanocomposites were developed from organically modified clay and poly(ethylene-co-vinyl acetate-co-carbon monoxide) by melt mixing. FTIR spectroscopy reveals that the interaction between the organoclay and EVACO is thermodynamically favored. High resolution wide angle X-ray diffraction and transmission electron microscopy were used to study the morphology of the nanocomposites. Elemental mapping by scanning electron microscopy indicates good dispersion and distribution of the nanoclay in EVACO matrix. The mechanical properties of the nanocomposites are optimum at a clay loading of 3%. © Springer Science+Business Media, LLC 2011.Item Structural characterization of nano-crystalline Co3O4 ultra-fine fibers obtained by sol-gel electrospinning(2013) George, G.; Anandhan, S.In this paper, we report the obtention of ultrafine fibers of cobalt oxide (Co3O4) by combining electrospinning method with high-temperature calcinations from the precursor sol of poly(2-ethyl-2- oxazoline) (PEtOx)/cobalt acetate tetrahydrate [Co(CH3COO) 2·4H2O] in water. The optimum electrospinning conditions for obtaining precursor composite nanofibers from PEtOx/Co(CH 3COO)2·4H2O solution in water, to produce ceramic nanofibers, were studied. The average fiber diameter of the precursor composite fibers measured by scanning electron microscopy (SEM) was approximately 200 nm. Thermogravimetric analysis of PEtOx was performed to estimate the suitable calcination temperature of the precursor fibers. SEM images of the ceramic fibers obtained after calcination revealed the shrinkage in diameter due to complete degradation of the polymer and Co(CH 3COO)2·4H2O. Fourier transform infrared spectroscopy was used to ensure the complete pyrolysis of polymer during calcinations of the composite fibers. Crystalline properties of the ceramic fibers were studied by X-ray diffraction and high resolution transmission electron microscopy. The ceramic fibers are polycrystalline with an average grain size of ?40 nm obtained at a calcination temperature of 773 K. It was observed that the grain sizes increased as the calcination temperature was increased, due to self assembly mechanism. © 2013 Springer Science+Business Media New York.Item Synthesis and characterisation of nickel oxide nanofibre webs with alcohol sensing characteristics(Royal Society of Chemistry, 2014) George, G.; Anandhan, S.In this study, nickel oxide (NiO) nanofibres were obtained by a sol-gel electrospinning process followed by calcination from an aqueous sol of poly(2-ethyl-2-oxazoline)/nickel acetate tetrahydrate. Thermogravimetric analysis was used to determine the degradation temperature of the composite fibres, so as to get nickel oxide nanofibres. X-ray photoelectron spectroscopy and X-ray diffraction studies revealed the complete elimination of the organic phase from NiO fibres during calcination. The change in grain size with calcination temperature was determined by X-ray diffraction. The defects in fibres resulted in the modification of their Raman spectra as compared with that of a single crystal. The magnetic properties of the fibres were reduced as the calcination temperature was increased; this is due to the presence of non-stoichiometric defects. As the calcination temperature was increased, the amount of defects was reduced, which induced a difference in the band gap energy of the fibres. Sensitivity of the NiO fibres towards five different alcohols was studied, and the sensitivity towards ethanol was the highest. © The Royal Society of Chemistry 2014.Item Influence of organically modified clay mineral on domain structure and properties of segmented thermoplastic polyurethane elastomer(2014) Anandhan, S.; Lee, H.S.Segmented polyether-urethane/organically modified montmorillonite (O-MMT) nanocomposites were synthesized with poly(tetramethylene glycol) (PTMG), 4,4?-diphenylmethane diisocyanate (MDI), butane diol (BD), and a commercially available clay Cloisite-30B® (O-MMT). The state of dispersion of the clay crystals in the thermoplastic polyurethane elastomer (TPU) matrix was studied by X-ray diffraction and transmission electron microscopy (TEM). The phase-separated morphology of the TPU was revealed by high-resolution TEM (HRTEM) and atomic force microscopy (AFM). O-MMT caused a marginal increase in the glass transition temperature of the soft segments of the TPU and this increase is proportional to the amount of O-MMT in the nanocomposites. Differential scanning calorimetry (DSC) was employed to study the effect of O-MMT on the extent of phase separation in the TPU in these nanocomposites. Thermogravimetric analysis (TGA) results indicate a substantial improvement in the thermal stability of TPU by the addition of O-MMT. Tensile strength and elastic modulus are dramatically decreased by the incorporation of O-MMT into TPU, which is due to the hindrance of the phase-separation process by the exfoliated clay-layered crystals. © The Author(s) 2012 Reprints and permissions:sagepub.co.uk/journalsPermissions.nav.Item Structure-property relationship of sol-gel electrospun ZnO nanofibers developed for ammonia gas sensing(Academic Press Inc. apjcs@harcourt.com, 2014) Senthil, T.; Anandhan, S.Zinc oxide (ZnO) based nanomaterials have been used in various gas sensors due to the wide band gap (3.37. eV), large exciton binding energy and high mobility of charge carriers of ZnO. In this work, nanocrystalline ZnO nanofiber mats were synthesized through combined sol-gel electrospinning techniques followed by calcination, in which poly(styrene- co-acrylonitrile) and zinc acetate were used as the binder and precursor, respectively. Average diameter of the ZnO nanofibers decreased from 400 to 60. nm, while their grain size and crystallinity were enhanced by increasing the calcination temperature. Morphology and structure of the ZnO nanofiber mats were characterized by high resolution transmission electron microscopy, scanning electron microscopy, Fourier transform infrared spectroscopy and X-ray diffraction. ZnO nanofiber mats were found to be superhydrophilic (contact angle was close to 0°) by contact angle measurements. The sensitivity of these ZnO nanofibers in detecting gaseous ammonia was tested using an indigenous set up. Due to their high surface area and superhydrophility, these ZnO nanofiber mats were highly sensitive in sensing gaseous ammonia and the sensitivity of these mats increased as a function of their calcination temperatures. © 2014 Elsevier Inc.Item Interparticle interactions and lacunarity of mechano-chemically activated fly ash(Elsevier, 2015) Patil, A.G.; Shanmugharaj, A.M.; Anandhan, S.A class F fly ash was subjected to high-energy ball milling-induced mechano-chemical activation aided by a surfactant. The resultant nanostructured fly ash was characterized by various techniques. X-ray fluorescence results showed that the amount of iron oxide was reduced from 4.39% to 2.75% after pre-treatment of fly ash by magnetic separation. Ethyl acetate as the milling medium, a ball to powder ratio of 12:1 and 2wt% of surfactant reduced the average particle size of fly ash to 329nm and led to a specific surface area of 8.73m2/g. The decrease in crystallite size of mechano-chemically activated fly ash was confirmed from a reduction in peak intensity with a broadened amorphous phase by X-ray diffraction studies. X-ray photoelectron spectroscopic characterization illustrated that peak area of major elements (O, Si and Al) increased after milling. Morphological and FTIR studies revealed that the smooth and inert surface of the fly ash was converted to a rough and more reactive one after mechano-chemical activation. The surface modification of fly ash with the surfactant was determined from FTIR spectroscopy. Also, a fractal approach was used to characterize the lacunarity of the agglomerates in the nanostructured fly ash. © 2014 Elsevier B.V.Item Influence of planetary ball milling parameters on the mechano-chemical activation of fly ash(Elsevier, 2015) Patil, A.G.; Anandhan, S.This study illustrates the design of statistical analysis by Taguchi methodology to obtain nanostructured fly ash by planetary ball milling. An orthogonal array and analysis of variance were employed to analyze the effect of milling parameters. A class-F fly ash was subjected to planetary ball milling induced mechano-chemical activation aided by a surfactant. Ball milling parameters, such as ball-to-powder weight ratio, type and quantity of surfactant and type of medium were varied as guided by the Taguchi design. The nanostructured fly ash was characterized by dynamic light scattering, BET surface area analysis, X-ray diffraction, FTIR spectroscopy, scanning electron microscopy, field emission scanning electron microscopy and transmission electron microscopy. The ball-to-powder weight ratio and the surfactant type are the major influencing factors on lower crystallite size and average particle size and higher specific surface area. The surface modification of fly ash was confirmed by FTIR spectroscopy. The nano fly ash produced by this method has a wide application potential in polymer industries as reinforcement in composites. © 2015 Elsevier B.V.Item Nanostructured Fly Ash as Reinforcement in a Plastomer-Based Composite: A New Strategy in Value Addition to Thermal Power Station Fly Ash(Springer Netherlands, 2016) Patil, A.G.; Mahendran, A.; Anandhan, S.Class-F fly ash (FA) from a coal-fired thermal power station was subjected to high energy ball milling-induced mechanochemical activation aided by a surfactant. Subsequently, ethylene-octene copolymer/mechanochemically activated FA (EOC/MCA-FA) composites were prepared by solution casting. The surface modification of FA was confirmed from contact angle measurements and FTIR spectroscopy, which accounts for a good interaction between MCA-FA and the polymer matrix. X-ray diffraction reveals that the crystallite size of quartz phase present in FA got reduced, while the relative lattice strain on it increased during milling. Morphological studies revealed that interfacial adhesion between the polymer and MCA-FA is good and this accounts for the improvement in mechanical properties of the composites even at the minimum filler loading. Flame retardance of the matrix polymer is improved by the addition of either fresh FA or MCA-FA. The results imply that FA is a valuable reinforcing filler for ethylene-octene copolymer and its mechanochemical activation is an effective strategy for its future use. © 2014, Springer Science+Business Media Dordrecht.Item Probing the synergism of halloysite nanotubes and electrospinning on crystallinity, polymorphism and piezoelectric performance of poly(vinylidene fluoride)(Royal Society of Chemistry, 2016) Khalifa, M.; Mahendran, A.; Anandhan, S.Poly(vinylidene fluoride) (PVDF) nanofibers have tremendous potential in nano-sensing and energy scavenging applications. In this study, uniaxially aligned nanofibers were developed from halloysite nanotubes (HNT)/PVDF nanocomposite using electrospinning technique. Incorporation of HNT into PVDF not only reduced the diameter of the electrospun nanofibers, but, also improved their morphology. Fourier transform infrared spectroscopy, wide angle X-ray diffraction and differential scanning calorimetry techniques were used to characterize the crystallinity, polymorphism and polymer-filler interaction in the nanocomposite nanofibers. A force sensor was indigenously designed to study the piezoelectric responses of the nanocomposite nanofibers. At 10 wt% of HNT loading, the sensor produced the highest voltage output, which can be ascribed to its highest ?-phase content. Incorporation of HNT and use of electrospinning synergistically enhanced the ?-phase content and hence the piezoelectric behavior of PVDF. Hence, these nanofibers could be promising and prominent materials in sensor and actuator applications. © The Royal Society of Chemistry.Item Optimised microwave-assisted biosynthesis of silver nanoparticles from Nothapodytes foetida leaf extracts and its anti-microbial activities(Taylor and Francis Ltd. michael.wagreich@univie.ac.at, 2016) Roopesh, R.; Geedhika, G.; D'Souza, J.; Anandhan, S.; Bhat, K.U.; Jaya M, J.; Fathima B, S.; Mohan Balakrishnan, R.M.The present investigation reports the biogenesis of silver nanoparticles (Ag NPs) using extracts of a medicinal plant Nothapodytes foetida. Total phenolic content (TPC) and ferric reducing antioxidant power (FRAP) assay were carried out for the microwave-assisted extract (MAE) of N. foetida using methanol as solvent and the conditions for extraction were optimised by response surface methodology (RSM). The effects of operating variables such as extraction time, temperature and ratio of sample to solvent were studied using central composite design (CCD). A mathematical model with a high determination coefficient (R2) for TPC (0.991) and FRAP (0.995) was obtained. The optimal conditions of extraction for TPC were 48.6 ºC, 23.15 min and 2.04:30 (g/mL) and for FRAP 52.31ºC, 12.32 min and 1.67: 30 (g/mL). Under these conditions, the experimental yields of TPC and FRAP were 2.426 mg gallic acid equivalents (GAE)/g dry powder and 14.985mg of FeSO4·7H2O/g of dry powder, respectively. Ag NPs were characterised using UV–Vis spectroscopy, transmission electron microscopy (TEM), X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy. The synthesised Ag NPs have also shown potent activity against the human pathogenic Staphylococcus aureus. © 2016 Informa UK Limited, trading as Taylor & Francis Group.