Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
6 results
Search Results
Item Influence of planetary ball milling parameters on the mechano-chemical activation of fly ash(Elsevier, 2015) Patil, A.G.; Anandhan, S.This study illustrates the design of statistical analysis by Taguchi methodology to obtain nanostructured fly ash by planetary ball milling. An orthogonal array and analysis of variance were employed to analyze the effect of milling parameters. A class-F fly ash was subjected to planetary ball milling induced mechano-chemical activation aided by a surfactant. Ball milling parameters, such as ball-to-powder weight ratio, type and quantity of surfactant and type of medium were varied as guided by the Taguchi design. The nanostructured fly ash was characterized by dynamic light scattering, BET surface area analysis, X-ray diffraction, FTIR spectroscopy, scanning electron microscopy, field emission scanning electron microscopy and transmission electron microscopy. The ball-to-powder weight ratio and the surfactant type are the major influencing factors on lower crystallite size and average particle size and higher specific surface area. The surface modification of fly ash was confirmed by FTIR spectroscopy. The nano fly ash produced by this method has a wide application potential in polymer industries as reinforcement in composites. © 2015 Elsevier B.V.Item Electroactive poly(vinylidene fluoride) fluoride separator for sodium ion battery with high coulombic efficiency(Elsevier B.V., 2016) Janakiraman, S.; Surendran, A.; Ghosh, S.; Anandhan, S.; Adyam, A.Electroactive separators are recent interest in self-charging rechargeable batteries. In this study, electrospun polyvinylidene fluoride (PVDF) is characterized as an electroactive separator for Na-ion batteries. The intrinsic ?-phase with high porosity of the separator is confirmed from X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Field emission scanning electron microscopy (FESEM) and Atomic Force Microscopy (AFM) studies. The electroactive separator is immersed in 1M NaClO4-ethylene carbonate (EC)/diethyl carbonate (DEC) (1:1 by weight) solution. The physicochemical characteristics of electroactive separator electrolyte (EaSE) were investigated using sodium ion conductivity, ion transference number and contact angle measurements. Linear and cyclic voltammetry studies were also carried out for the electrolyte system to evaluate oxidation stability window. The inherent ?-phases of the separator as obtained by electrospinning has an ionic conductivity of ~ 7.38 × 10- 4 S cm- 1 under ambient condition. Sodium ion cell made from EaSE with Na0·66Fe0.5Mn0·5O2 as cathode and Na metal as anode has displayed a stable cycle performance with a coulombic efficiency of 92% after 90 cycles. © 2016 Published by Elsevier B.V.Item Electrochemical characterization of a polar ?-phase poly (vinylidene fluoride) gel electrolyte in sodium ion cell(Elsevier B.V., 2019) Janakiraman, S.; Surendran, A.; Biswal, R.; Ghosh, S.; Anandhan, S.; Adyam, A.A polar ?-phase poly (vinylidene fluoride) (PVDF) membrane is developed through the electrospinning method. PVDF gel electrolyte for sodium ion batteries was obtained by saturating the bare porous membrane in a liquid electrolyte, 1 M NaClO4 in EC: DEC (1:1 vol%). The physical and electrochemical characteristics of the polar ?-phase PVDF membrane are explored by X-ray diffraction (XRD), Field emission scanning electron microscopy (FESEM), Atomic force microscope (AFM), sodium ion conductivity, linear sweep voltammetry (LSV) and sodium ion transference number. The ionic conductivity of a polar ?-phase PVDF gel electrolyte exhibited 9.2 × 10?4 S cm?1, higher than the commercially used Celgard® 2400 membrane 0.36 × 10?4 S cm?1 at ambient temperature. The electrochemical expolarations of the sodium ion half-cell (Na2/3Fe1/2Mn1/2O2) as a cathode and sodium metal as a counter electrode) conducted from PVDF gel electrolyte are analysed by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). CV of the battery showed a pseudo capacitive nature. The equivalent circuit model of the sodium ion cell brought out the effect of dipole moments in the polymer chains on the battery performance. © 2018 Elsevier B.V.Item An electroactive ?-phase polyvinylidene fluoride as gel polymer electrolyte for magnesium–ion battery application(Elsevier B.V., 2019) Singh, R.; Janakiraman, S.; Khalifa, M.; Anandhan, S.; Ghosh, S.; Adyam, A.; Biswas, K.The gel polymer electrolytes (GPEs) are currently interesting research area in rechargeable batteries. In the present study, synthesis and characterization of electroactive gel polymer electrolyte (EGPE) for Mg-ion batteries application have been investigated. The bead free electroactive polyvinylidene fluoride (PVDF) with high porosity is achieved by an electrospinning process. The ?-phase of PVDF is polar and electroactive with a high dipole moment. Electroactive ?-phase is confirmed by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). Field emission scanning electron microscopy (FESEM) study is done to analyze the structure and morphology of the electroactive membrane. The electroactive gel polymer electrolyte is formed by immersing an electroactive PVDF membrane in 0.3 M magnesium perchlorate (MgClO4) and propylene carbonate (PC) solution. The ionic conductivity of electroactive ?-phase PVDF membrane is achieved to be 1.49 mS cm?1 at 30 °C, which is higher than commercial available polypropylene (PP) Celgard. Tortuosity of electroactive gel polymer electrolyte is found to be 1.44. The voltage stability of the EGPE is stable up to a high voltage of 5.0 V against Mg+2/Mg. The total ionic transference number and magnesium ion transference number of EGPE are also investigated to confirm high ionic conductivity. © 2019 Elsevier B.V.Item Sol-gel electrospun ZnMn2O4 nanofibers as bifunctional electrocatalysts for hydrogen and oxygen evolution reactions(Institute of Physics Publishing helen.craven@iop.org, 2019) Shamitha, C.; Shetty, A.R.; Hegde, A.C.; Anandhan, S.Electrochemical water-splitting has gained significant attention for the development of next generation fuels. The present work is an investigation on the electrocatalytic activity towards both Oxygen Evolution Reaction (OER) and Hydrogen Evolution Reaction (HER) of ZnMn2O4 (ZMO) nanofabrics synthesized by sol-gel electrospinning followed by calcination (at 500, 600 and 700 °C). Poly(styrene-co-acrylonitrile) was used as the polymeric binder for the production of nanofabrics. The morphological features of ZMO nanofabrics were studied by scanning electron microscopy and field emission scanning electron microscopy. The electrocatalytic behavior of ZMO nanofabrics obtained at different calcination temperatures was evaluated using chrono-potentiometry, cyclic voltammetry, and linear sweep voltammetry in an alkaline medium (1 M KOH). The ZMO nanofabrics calcined at 500 °C exhibited the maximum electrocatalytic activity towards HER. This can be ascribed to their superior specific surface area (79.5 m2 g-1). The nanofabrics calcined at 700 °C displayed the least potential for O2 evolution and hence they are considered to be effective for OER. The results prove that ZMO nanofabrics are promising candidates as bifunctional electrocatalysts for water-splitting applications. © 2019 IOP Publishing Ltd.Item A high thermally stable polyacrylonitrile (PAN)-based gel polymer electrolyte for rechargeable Mg-ion battery(Springer, 2020) Singh, R.; Janakiraman, S.; Khalifa, M.; Anandhan, S.; Ghosh, S.; Adyam, A.; Biswas, K.The ionic conductivity and thermal stability of the electrolyte-separator system is an essential parameter for improving battery performance and safety. The present work addresses the high thermally stable gel polymer electrolyte (GPE) using polyacrylonitrile (PAN) as a polymer membrane and magnesium perchlorate in propylene carbonate (Mg(ClO4)2-PC) as a liquid electrolyte. The PAN based polymer membrane is prepared by electrospinning process which produces a bead free and uniformly distributed nanofibers. The electrospun PAN based GPE is characterized by different physical and electrochemical techniques like X-ray diffraction, field emission scanning electron microscopy, thermogravimetric analysis, differential scanning calorimetry, ionic conductivity, linear sweep voltammetry, magnesium ion transference number and electrochemical impedance spectroscopy. The ionic conductivity of PAN is 3.28 mS cm?1, compared to that of PP Celgard is 1.97 × 10–4 mS cm?1 at 30 °C. The electrochemical stability of PAN is 4.6 V and also exhibits excellent interfacial stability with magnesium metal. The results showed that the PAN-based GPE has higher ionic conductivity and thermal stability than the polypropylene (PP) Celgard membrane. © 2020, Springer Science+Business Media, LLC, part of Springer Nature.