Faculty Publications

Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736

Publications by NITK Faculty

Browse

Author: search.filters.author.Anandhan, S.Subject: search.filters.subject.Biocompatibility

Search Results

Now showing 1 - 5 of 5
  • No Thumbnail Available
    Item
    Hemocompatibility of Sulfuric Acid-Treated Metallocene Polyethylene and its Application in Reducing the Quantity of Medical Plastic Waste
    (Taylor and Francis Inc. 325 Chestnut St, Suite 800 Philadelphia PA 19106, 2017) Jaganathan, S.K.; Balaji, A.; Mohanadas, H.; Sivakumar, G.; Kasi, P.; SelvaKumar, M.; Kadiman, S.B.; Anandhan, S.; Faudzi, A.A.B.; Supriyanto, E.; Mandal, M.
    The hazards of dumping medical plastics have created a huge demand to reduce the quantity of plastic usage without compromising its quality. The metallocene synthesized polyethylene is one such advent, however, its clinical usage is limited by the problem of hemocompatibility. This study investigates the effect of sulfuric acid-induced changes in metallocene polyethylene. Fourier transform infrared spectroscopy analysis illustrated the addition of OH and sulfonic acid group, which subsequently increased the wettability. An improvement in micro as well as nanosurface roughness was observed. Ultimately, the treated surfaces depicted delayed clotting time, adsorption of specific plasma proteins, reduced hemolysis, and resistance against platelet adhesion. © 2017 Taylor & Francis.
  • No Thumbnail Available
    Item
    Evaluation of piezoelectric behavior and biocompatibility of poly(vinylidene fluoride) ultrafine fibers with incorporated talc nanosheets
    (John Wiley and Sons Inc, 2022) Shetty, S.; SelvaKumar, S.; Salehi, S.; Pellert, A.; Scheibel, M.; Scheibel, T.; Anandhan, S.
    Herein, we fabricated biocompatible ultrafine fibers based on talc nanosheets (TNS)/PVDF composites that can exhibit robust electromechanical responses. Piezoresponse force microscopy (PFM) was extensively used to decode various characteristics, including ferroelectric and piezoelectric coefficients. The 0.5 wt% TNS dispersed ultrafine fibers exhibited well-defined ferroelectric characteristics with an enhanced piezoelectric coefficient (d33) of ≈43.3 pm/V compared to 10 pm/V measured for the pristine PVDF ultrafine fibers. It was observed that the piezoelectric coefficient values strongly depended on the morphology and electroactive phase fraction of the ensuing composite ultrafine fiber. The advantage of a high aspect ratio and surface charges offered by TNS alongside electrospinning augmented the composite ultrafine fiber's piezoelectric response. Further, in-vitro cytotoxicity of the TNS/PVDF composite ultrafine fibers was examined using BALB/3T3 fibroblasts based on ISO Standard 10993-5. Importantly, the new composite fibers showed no cytotoxic response and the exposed fibroblasts showed excellent viability. Thus, these fabricated TNS/PVDF piezoelectric ultrafine fibers are well suited for applications in bioelectronics, especially as flexible wearable electronic devices, including sensors. © 2022 Wiley Periodicals LLC.
  • No Thumbnail Available
    Item
    Probing the influence of strontium doping and annealing temperature on the structure and biocompatibility of hydroxyapatite nanorods
    (Royal Society of Chemistry, 2024) Patil, H.G.; Rajendran, A.; Lenka, N.; Kumar, B.S.; Murugesan, S.; Anandhan, S.
    Among numerous biologically important metal cations, strontium (Sr2+) has received much attention in bone tissue regeneration because of its osteoinductive properties combined with its ability to inhibit osteoclast activity. In this study, strontium-doped hydroxyapatite (Sr-HAp) nanorods with varying molar ratios of Ca : Sr (10 : 0, 9 : 1, 5 : 5, 3 : 7 and 0 : 10) were synthesized using the chemical precipitation technique. The synthesized Sr-HAp nanostructures were characterized using powder X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy, energy dispersive X-ray spectroscopy, and Raman and Fourier transform infrared (FTIR) spectroscopies to understand their structural and morphological features, and composition. XRD results revealed the formation of HAp nanostructures, whose unit cell volume increased as a function of the dopant level. The reaction process investigation showed the formation of hydroxyapatite (HAp), strontium apatite (SAp) and various Sr-HAp phases. FESEM micrographs displayed the morphological transformation of Sr-HAp from nanorods to nanosheets upon increasing the dopant level. In the FTIR spectra, the bands of the PO43− group shifted towards a lower wavenumber upon increasing the dopant concentration in Sr-HAp that signifies the structural distortion due to the presence of a large amount of strontium ions. The peaks of PO43− and OH− vibrations in the Raman spectra were further analysed to corroborate the structural distortion of Sr-HAp. Selected area electron diffraction patterns obtained using TEM reveal the reduced crystallinity of Sr-HAp due to Sr-doping, which is in line with the XRD results. Finally, the MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay showed that the synthesized Sr-HAp has no toxic effect on the survival and growth of mesenchymal stem cells. In summary, the synthesized novel Sr-HAp nanorods exhibit great promise for bone tissue engineering applications. © 2024 The Royal Society of Chemistry.
  • No Thumbnail Available
    Item
    Development of electrospun scaffolds for bone regeneration from strontium-doped hydroxyapatite nanorods and thermoplastic polyurethane elastomer
    (Elsevier Ltd, 2025) Murugesan, S.; Patil, H.G.; Deshmukh, B.K.; N, S.; Asokan, A.; Mohapatra, A.; Lenka, N.; Anandhan, S.
    Strontium based biomaterials have gained importance in bone tissue regeneration due to their incredible osteoinductivity and differentiation ability. In this study, strontium-doped hydroxyapatite nanorods [SrHAp, Ca9Sr(PO4)6(OH)2] were synthesized by the coprecipitation method. Subsequently, electrospun fibrous scaffolds were fabricated from thermoplastic polyurethane elastomer (TPU) dispersed with SrHAp nanorods. The loading of SrHAp nanorods in TPU was varied from 1 wt% to 7 wt% in steps of 2. Morphology of electrospun fibrous scaffolds and the dispersion of nanorods in the TPU matrix were characterised by field emission scanning electron microscopy, and elemental mapping by energy-dispersive x-ray spectroscopy, respectively. The scaffolds exhibited 3D interconnected network structure with well-distributed pores. The SrHAp nanorods were observed to be smoothly dispersed in the polymer matrix in the scaffolds using elemental mapping and transmission electron microscopy. The newly developed scaffolds exhibited adequate mechanical strength combined with good biocompatibility and excellent biomineralization characteristics. Further, MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay of the electrospun scaffolds against gingiva-derived mesenchymal stem cells (gMSCs) revealed excellent survival and growth rate of the cells. In addition, the osteoinductivity study using gMSCs confirms the better osteodifferentiation in the scaffold containing 5 wt% SrHAp compared with its counterparts by showing the expressions of alkaline phosphatase (ALP), osteocalcin (OCN) and RUNX2. Among all the compositions, the one with 3 wt% SrHAp loading demonstrated promising results in terms of fiber uniformity, improved mechanical properties, and enhanced cell viability. Thus, the SrHAp/TPU scaffolds developed in this study have the potential for use in bone tissue regeneration. © 2025 Elsevier Ltd
  • No Thumbnail Available
    Item
    A systematic analysis on the electrospinnability of biocompatible poly(butylene adipate-co-terephthalate)
    (Institute of Physics, 2025) Das, A.; Anandhan, S.; Chethan, K.N.; Salins, S.S.; Shetty, R.; Shetty, S.
    Fine-tuning electrospun nanofibers is crucial for producing high-quality fibers. Taguchi Design of Experiment (DOE), along with various other computational techniques, has been used to optimize the electrospinning parameters of different polymers. Taguchi DOE has proven effective in optimizing electrospun nanofibers because it reduces the number of trials needed. In this study, the electrospinning parameters of poly (butylene adipate-co-terephthalate) (PBAT) were optimized and quantified using the Taguchi-based Response Surface Methodology (RSM) approach. The average fiber diameters were measured from Field Emission Scanning Electron Microscopy (FESEM) images using ImageJ software. Within the tested range of parameters and levels, the Analysis of Variance (ANOVA) study identified polymer concentration and flow rate as the most significant factors that influenced the fiber diameter. Polymer concentration accounting 56.94% of the variation, while Flow Rate (FR) accounts for 20.82%. The optimal parameter levels were predicted to be 10 wt% polymer concentration, 1 ml h?1 flow rate, 18 kV voltage, and a distance from tip to target of 15 cm, which yielded fibers with an average diameter of 231 nm and an accuracy of 88.61%. Overall, the results demonstrate that Taguchi DOE, coupled with RSM, is a reliable and efficient method for identifying the optimal parameter combinations to produce uniform, fine PBAT nanofibers intended for biomedical applications. © 2025 IOP Publishing Ltd. All rights, including for text and data mining, AI training, and similar technologies, are reserved.