Conference Papers

Permanent URI for this collectionhttps://idr.nitk.ac.in/handle/123456789/28506

Browse

Subject: search.filters.subject.Stainless steel

Search Results

Now showing 1 - 3 of 3
  • No Thumbnail Available
    Item
    Wetting behavior and evolution of microstructure of Sn-3.5Ag solder alloy on electroplated 304 stainless steel substrates
    (Springer India sanjiv.goswami@springer.co.in, 2012) Nayak, V.U.; Prabhu, K.N.; Stanford, N.; Satyanarayan, S.
    In the present study, wetting characteristics and evolution of microstructure of Sn-3.5Ag solder on Ag/Ni and Ni electroplated 304 stainless steel (304SS) substrates have been investigated. Solder alloy spread on Ag/Ni plated 304SS substrates exhibited better wetting as compared to Ni/304SS substrate. The formations of irregular shaped and coarser IMCs were found at the interface of solder/Ni/304SS substrate region whereas, solder/Ag/Ni/substrate interface showed continuous scallop and needle shaped IMCs. The precipitation of Ag3Sn, Ni-Sn, FeSn2 and lesser percentage of Fe-Cr-Sn IMCs were found at the interface of solder/Ag/Ni/substrate region whereas, solder/Ni/304 SS substrate exhibited predominantly FeSn2 and Fe-Cr-Sn IMCs. Presence of higher amount of Fe-Cr-Sn IMCs at the solder/Ni/304SS substrate interface inhibited the further wetting of solder alloy.
  • No Thumbnail Available
    Item
    Finite element modeling and experimental validation of rectangular pin buckle arrestors for offshore pipelines
    (Elsevier Ltd, 2019) Ramachandra Rao, N.; Kaliveeran, V.
    Offshore pipelines used for transportation of hydrocarbons in the oil industry are subjected to external pressure, internal pressure to ensure flow, temperature and axial compression which causes buckling. Finite element modeling was performed, and experiments were conducted on pipeline models made of stainless steel of grade SS304. Present research work focuses on the improvement in buckling strength of offshore pipelines stiffened with rectangular pin buckle arrestor along the length of a pipeline using finite element analysis and their experimental validation. The results of finite element analysis showed that an offshore pipeline model without buckle arrestors has a buckling load of 4.69 kN whereas offshore pipeline stiffened with buckle arrestors of length 1000 mm along the length of a pipeline resulted in maximum buckling load of 14.075 kN. Accordingly, pipeline models were fabricated for conducting experiments. Comparison of finite element analysis results and experimental outcomes showed that the efficiency of buckle arrestor increased significantly by incorporating buckle arrestor along the length of a pipeline. © 2019 Elsevier Ltd. All rights reserved.
  • No Thumbnail Available
    Item
    Analysis and design of inclined buckle arrestors for offshore pipeline
    (Elsevier Ltd, 2019) Ramachandra Rao, N.; Kaliveeran, V.
    Present research work focuses on improving buckling strength of offshore pipelines by strengthening them with inclined stiffeners and inclined stiffeners with connecting rods. Eigenvalue buckling analysis was carried out using Finite Element Methods to find the buckling strength of the considered pipeline models. Seamless stainless steel pipe models of SS304 grade were considered for finite element analysis. The pipeline models were provided with inclined stiffeners whose angle of inclination varies from 100° to 176°. Connecting rods of different lengths is used to improve capacity of inclined stiffeners. In this paper, the effect of inclined stiffener configurations in improving the strength of offshore pipelines against buckling is presented. The finite element analysis results show that a pipeline strengthened with inclined stiffeners and inclined stiffeners with connecting rod showed improved buckling load carrying capacity. © 2019 Elsevier Ltd. All rights reserved.