Conference Papers

Permanent URI for this collectionhttps://idr.nitk.ac.in/handle/123456789/28506

Browse

Filters

2017 - 20195

Settings

Author: search.filters.author.Paul, P.M.

Search Results

Now showing 1 - 5 of 5
  • No Thumbnail Available
    Item
    SRR loaded slot antenna for multiband applications
    (Institute of Electrical and Electronics Engineers Inc., 2017) Paul, P.M.; Kandasamy, K.; Sharawi, M.S.
    A compact square shaped microstrip triband slot antenna is proposed. Two Split Ring Resonators (SRR) of the same configuration are loaded at one edge of the slot in a back to back orientation. The other edge of the slot is displaced with two 180° rotated SRR's with multiple slits. The additional bands are obtained from the resonance properties of the loaded SRR's. The antenna is simulated and measured. The resonance frequencies obtained are 2.7 GHz, 4.3 GHz and 4.7 GHz. A minimum bandwidth of 130 MHz is achieved. © 2017 IEEE.
  • No Thumbnail Available
    Item
    A Multi-Band SRR and Strip Loaded Slot Antenna
    (Institute of Electrical and Electronics Engineers Inc., 2018) Paul, P.M.; Kandasamy, K.; Sharawi, M.S.
    In this paper, a novel compact slot antenna suitable for penta-band applications is proposed. The different resonances are obtained by loading the slot on the top layer with an array of copper strips of equal length and with a Split Ring Resonator (SRR) at the bottom layer. The antenna prototype is fabricated and measured. The simulated and measured results are in good agreement. The antenna is found to resonate at frequencies of 1.51 GHz, 2.35 GHz, 2.9 GHz, 3.66 GHz and 5.6 GHz. Also, a gain higher that 2.4 dBi and a bandwidth of at least 80MHz are obtained for all the bands. © 2018 IEEE.
  • No Thumbnail Available
    Item
    Quad band SRR loaded square slot antenna
    (Institute of Electrical and Electronics Engineers Inc., 2018) Paul, P.M.; Kandasamy, K.; Sharawi, M.
    This paper proposes a Split Ring Resonator (SRR) loaded quad band microstrip slot antenna designed to operate at 2.42 GHz, 4.33 GHz, 8.46 GHz and 10.9 GHz. The additional resonant bands are generated by loading the square slot antenna with two pairs of SRR structures on either side of the feed line. The bands centered at 8.46 GHz and 10.9 GHz are found to exhibit wideband and circular polarization properties respectively. The resonance band at 8.46 GHz provides a wide bandwidth of 2.43 GHz. One pair of the loaded SRR structure consists of two spiral shaped connected SRR's. The excitation of these structures gives rise to a circularly polarized band at 10.9 GHz with 3-dB axial ratio bandwidth of 390 MHz. Maximum gains of 3.82 dB, 3.95 dB, 7.5 dB and 4.2 dB are obtained at the four resonant frequencies, respectively. A minimum bandwidth of 270MHz is observed for all the bands of operation. © 2017 IEEE.
  • No Thumbnail Available
    Item
    A Tri-Band SRR Loaded Half Slot Antenna with Wideband Properties
    (Institute of Electrical and Electronics Engineers Inc., 2018) Paul, P.M.; Kandasamy, K.; Sharawi, M.S.
    In this paper, a compact tri-band split ring resonator (SRR) loaded slot antenna is proposed which offers independent frequency tunability for operation at WLAN and WiMAX bands. The microstrip fed slot antenna is loaded with a modified SRR to obtain the triband resonance. The compactness is achieved by using an open slot antenna. The slot is designed to resonate at 2.4 GHz, which combines with the resonance obtained due to a fictitious short circuit produced at a certain point along the slot. This leads to the wideband property at the first band. The second and third resonances are obtained at 7.5 GHz and 9.3 GHz. The resonances can be independently controlled by changing the slot and SRR dimensions. © 2018 Radio Society.
  • No Thumbnail Available
    Item
    A Corner Expanded CPW-Fed Slot Antenna with Circular Polarization Characteristics
    (Institute of Electrical and Electronics Engineers Inc., 2019) Paul, P.M.; Kandasamy, K.; Sharawi, M.S.
    A planar, slot-based, simple and circularly polarized (CP) antenna is presented in this work. It consists of a square shaped slot that is fed via a coplanar waveguide (CPW) 50-ohm feed. The CP slot operates at a center frequency of 2.5GHz. Here, the corners are modified by adding small symmetric rectangular slot extensions to produce CP based waves. The plots obtained on simulation and measurement of the fabricated prototype display commendable similarity between each other. Very wide axial ratio bandwidth (ARBW) of 35% along with a maximum gain of 3.5dBi at 2.5GHz were accomplished. © 2019 European Association on Antennas and Propagation.