Conference Papers

Permanent URI for this collectionhttps://idr.nitk.ac.in/handle/123456789/28506

Browse

Author: search.filters.author.Narasimhan, M.C.Subject: search.filters.subject.Compressive strength

Search Results

Now showing 1 - 3 of 3
  • No Thumbnail Available
    Item
    Experimental studies on shear strength characteristics of alkali activated slag concrete mixes
    (Elsevier Ltd, 2020) Manjunath, R.; Narasimhan, M.C.; Shashanka, M.; Vijayanand, S.D.; Vinayaka, J.
    In the present study an attempt has made to study the shear strength characteristics of alkali activated slag concrete mixes developed using steel slag sand and Electric Arc Furnace (EAF) slag aggregates, respectively, as the fine and coarse aggregates. These mixes use the ground granulated blast furnace slag (GGBFS) as the primary source material. Thus it is to be recognized that all the three materials used-GGBFS, slag sand and EAF slag aggregates are by-products of the Iron and Steel Industry, and are available in very large quantities demanding safe disposal. Different amounts of Sodium silicate solutions, with specified amounts of Sodium hydroxide flakes dissolved in them, are used as alkaline solutions. The test results indicate higher compressive strengths values for all the mixes in the range of 50-70 MPa with their shear strength values ranging between 7.5 and 12.0 MPa. Further the relationship between shear strength and compressive strength of the AASC mixes was also developed. © 2019 Elsevier Ltd. All rights reserved.
  • No Thumbnail Available
    Item
    Performance of Alternate Superplasticizers on Performance of Self-compacting Geopolymer Mortars—An Experimental Study
    (Springer Science and Business Media Deutschland GmbH, 2024) Prakash, G.B.; Mahendra, K.; Tanush, L.; Narasimhan, M.C.
    Geopolymer binders are the best alternatives to Ordinary Portland cement in the view of carbon impact on the environment. The effect of addition of different types of superplasticizers (SPs) on the flow and compressive strengths of a class of self-compacting geopolymeric mortar (SCGM) mixes is investigated in the present study. Three different kinds of SPs, namely modified Polycarboxylate Ether (MPCE), Polycarboxylate Ether (PCE), and Sulfonated Naphthalene Formaldehyde (SNF), were used in the production of SCGM with varying proportions at 1, 1.5, and 2% by weight of the binder. Results revealed that modified PCE-based SP showed better results in flow and compressive strength (CS) in comparison to PCE and SNF-based SPs. However, an increase in the dosage of SP had less/adverse effect on the flow properties. A maximum slump flow of 270 mm was observed for a modified PCE-based SP at 1.5% dosage, while the highest CS of 34 MPa was observed at 1.5% dosage of the same SP. Scanning electron microscope (SEM) analyses were carried out on a few selected SCGM mixes. © The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd. 2024.
  • No Thumbnail Available
    Item
    Shear Strength Characteristics of One-Part Alkali Activated Concrete Mixes—A DOE Approach
    (Springer Science and Business Media Deutschland GmbH, 2024) Mahendra, K.; Prakash, G.B.; Shetty, S.; Narasimhan, M.C.
    Utilization of one-part alkali-activated concrete (OPAAC) mixes is an advantageous option for large-scale construction applications. In the present investigation, the main objective was to investigate the shear strength characteristics of OPAAC mixes that were made using GGBFS and fly ash as precursors and sodium meta-silicate as solid activator. Taguchi’s DOE approach has been used to reduce the experimental effort and to find the optimum parameters. An initial set of nine OPAAC mixes was identified based on an L-9 array, with three representative levels considered for each of three principal mix parameters and experiments were conducted to test their compressive and shear strengths. The test results revealed that the OPAAC mixes exhibited 28-day compressive strength values ranging from 55 to 70 MPa, with shear strengths varying in the range of 8.5–12.67 MPa. Multi-linear regression equations were then developed to predict the 28-day compressive and shear strengths using MINITAB 21 statistical software. The predictions of these were verified by conducting actual strength experiments on a new set of three verification mixes. Further, additionally, a generalized correlation was developed to predict the 28-day shear strength of OPAAC mixes based on the known 28-day compressive strength. Again, an examination of microstructures was carried out through the utilization of FESEM analysis, to get a general appreciation of the microstructure (morphology) and elemental composition using EDX analysis of these mixes. The outcomes of this study are anticipated to promote the extensive adoption of environmentally friendly and sustainable materials within the construction industry. The findings of this study are anticipated to promote the extensive adoption of environmentally friendly and sustainable materials in the construction industry. © The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd. 2024.