Conference Papers
Permanent URI for this collectionhttps://idr.nitk.ac.in/handle/123456789/28506
Browse
3 results
Search Results
Item Prediction of heat transfer with discrete heat sources in a vertical channel filled  ith high porosity metal foam(Dalian University of Technology, 2018) Kotresha, B.; Gnanasekaran, N.This paper discusses about the numerical prediction of isothermal condition with discrete heat sources in a vertical channel filled with high porosity metal foams. The problem considered consists of a vertical channel in which discrete heat source assembly is placed at the centre and high porosity metal foams are placed on either side of the aluminium plates to enhance the heat transfer. The flow through the metal foam porous medium is predicted by using Darcy Extended Forchheimer model and Local thermal non-equilibrium model as well as local thermal equilibrium model is used for heat transfer prediction. The results are presented in terms of temperature excess over the ambient for both empty and metal foam filled channel. Finally, the heat input through the discrete heat sources is varied to obtain an isothermal condition on all the heat sources at a constant inlet velocity. © 2018 by the authors of the abstracts.Item Natural Convection Through High Porosity Metal Foams—A Numerical Study(Springer Science and Business Media Deutschland GmbH, 2021) Kotresha, B.; Jadhav, P.H.; Gnanasekaran, N.Numerical analysis of natural convection through highly porous metal foams attached to the aluminium plates is performed in this study. A heater sandwiched between two aluminium plates attached with aluminium metal foams of different pores per inch (PPI) is considered for the present analysis. Initially, experiments are carried out for aluminium plate-heater assembly for different heat inputs. In the numerical investigation, the aluminium plates are attached with metal foams on either side for further analysis. A well-known Darcy extended Forchheimer flow and LTNE thermal models are considered for the metal foam in the computations. The natural convection is modelled using Boussinesq approximation. Initially, the numerical result for the plate without metal foam is validated with the experimental results for different heat inputs. The results show that the Nusselt number decreases with the increase of metal foam pore density (PPI) and increases with the increase in Rayleigh number. © 2021, The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.Item Forced Convection Analysis in a Horizontal Pipe in the Presence of Aluminium Metal Foam—A Numerical Study(Springer Science and Business Media Deutschland GmbH, 2021) Jadhav, P.H.; Kotresha, B.; Gnanasekaran, N.; Arumuga Perumal, D.Numerical exploration of forced convective heat transfer through the aluminium metallic foam filled in a horizontal pipe is done expending a commercially existing software ANSYS FLUENT 15.0. The motive of the ongoing numerical examination is to investigate the effect of fully filled metal foam in a horizontal pipe for different flow regimes. 10 PPI metal foam having 0.85 porosity is filled 60% along the length of pipe in the flow direction. The Darcy-extended Forchheimer (DEF) flow and local thermal non-equilibrium (LTNE) models are considered at the metal foam region to envisage fluid flow and augment in heat transfer. The numerical methodology is validated by comparing the results with available experimental data. The results of pressure loss, variation of wall temperature and Nusselt number are reported and discussed. © 2021, The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.