Conference Papers
Permanent URI for this collectionhttps://idr.nitk.ac.in/handle/123456789/28506
Browse
3 results
Search Results
Item Suitability study of jute-epoxy composite laminate for low and high velocity impact applications(American Institute of Physics Inc. subs@aip.org, 2018) Mahesh, V.; Joladarashi, S.; Kulkarni, S.M.This paper discusses the effect of thickness on the energy absorbing ability of the jute-epoxy (JE) laminate under low velocity and high velocity impact conditions. In the present analysis, a parametric study has been carried out choosing three different thickness values of laminate (6 mm, 8mm and 10 mm) and four different velocities each under low (2m/s, 4m/s, 6m/s and 8 m/s) and high velocity (100 m/s, 150 m/s, 200 m/s and 250 m/s) impact conditions. A Damage behavior study has been carried out under both low and high velocity impacts to assess the suitable condition of application for JE laminate. It is found that, the energy absorbing ability of laminate increases with increasing laminate thickness and impact velocity, especially at higher values of impact velocity of the chosen regime. The outcome of the study of damage behavior under low and high velocity impact shows that JE laminate is suitable for low velocity impact applications rather than high velocity impact applications. © 2018 Author(s).Item Influence of laminate thickness and impactor shape on low velocity impact response of jute-epoxy composite: FE study(Elsevier Ltd, 2019) Mahesh, V.; Joladarashi, S.; Kulkarni, S.M.This paper aims at numerical and parametric investigation on the outcome of low velocity impact (LVI) response of jute/epoxy (JE) composite of varied thickness subjected to impact at varied velocity of impact within LVI regime using different shaped impactors. The JE composite laminate with varying thickness of 6 mm to 10 mm is subjected to LVI at impact velocity varying from 2 m per second (mps) to 8 mps using impactors of hemispherical (HS), flat (F) and conical (C) shapes. Modelling and simulation of the proposed JE composite laminate is achieved using explicit software available commercially with target as deformable material and the impactor as a rigid body. Simulations are carried out for available possible combination of thickness, impact velocity and impactor shapes. Results reveal that thickness is one of the crucial factors that decide the LVI response of the proposed composite laminate. Laminate impacted with conical shaped impactor results in maximum absorption of energy and the laminate impacted with flat shaped impactor results in bigger and immediate damage. © 2019 Elsevier Ltd.Item Parametric study on impact behaviour of sisal and cenosphere reinforced natural rubber-based hybrid composites: FE approach(Elsevier Ltd, 2021) Rajkumar, D.; Mahesh, V.; Joladarashi, S.; Kulkarni, S.M.This paper aims to study the impact analysis of sisal fiber and cenosphere filler reinforced natural rubber composite using commercially available finite element software. The proposed green composite is studied for impact behaviour by varying the weight percentage of the cenosphere filler particles in a natural rubber sheet. Composite is modelled with stacking sequence sisal-rubber-sisal using finite element software and impacted by three different rigid impactors (Conical, Hemi-spherical and Flat) at the velocity of 8m/s. Modelling and simulation of this proposed composite laminate are solved using the explicit dynamic solver of Abaqus Computer-Aided Engineering Finite Element Modelling. The results of the low-velocity impact of the proposed green composite with sisal-rubber-sisal stacking sequence exhibit better energy absorption by varying the weight percentage of the Cenosphere. Also, the energy absorbed by laminate was more for the Conical impactor than the Hemi-spherical and Flat impactors and the extent of damage is more when impacted by the Flat impactor due to its larger contact area. © 2021 Elsevier Ltd. All rights reserved.