Conference Papers
Permanent URI for this collectionhttps://idr.nitk.ac.in/handle/123456789/28506
Browse
3 results
Search Results
Item Buckling analysis of functionally graded materials by dynamic approach(Elsevier Ltd, 2020) Swaminathan, K.; Hirannaiah, H.; Rajanna, T.Laminated composites exhibit difference in the mechanical properties at the interface between two materials resulting in stress concentration. This may lead to damages in the form of delamination, matrix cracking and adhesive bond separation. Functionally Graded Materials (FGM) are formed by gradual variation of two or more material over a particular volume, thereby overcomes these issues. Buckling problems of FGM plates are usually solved by static approach. In some cases, particularly non-uniform loading and geometric discontinuity, the stress concentration usually occurs. In such cases, the solution to the buckling problem by dynamic approach is most suitable. In the dynamic approach, the natural frequencies are calculated by applying in-plane loads. As the intensity of the in-plane load increases, the frequency of the material decreases and finally becomes zero at the onset of buckling. The load at which the natural frequency becomes zero that load is called a buckling load. In this investigation, the vibration and buckling characteristics of FGM panels subjected to uniaxial and biaxial loading conditions have been studied by using the finite element method (F.E.M). In the Finite element (FE) formulation, the effective material properties of FGM plates are assumed to vary in the thickness direction according to the power-law distribution of volume fraction of the constituents. The plate is modelled by using 8-noded serendipity element by incorporating the effect of transverse shear deformation and rotary inertia. The effect of different parameters such as volume fraction index (n), the thickness of the panel (h) and boundary condition of the plate are considered to study the buckling behaviour of the FGM plate under uniaxial loading conditions. © 2020 Elsevier Ltd. All rights reserved.Item Effect of initial stresses on vibration behavior of functionally graded materials(Elsevier Ltd, 2020) Swaminathan, K.; Hirannaiah, H.; Rajanna, T.Functionally Graded Materials (FGM) is the result of continuous gradation of two or more constituent materials over a certain volume. This type of material overcomes many problems, particularly delamination, cracking and damages which are very frequently found in laminated composite materials. The FGMs are commonly found in space structures, and these structural elements are subjected to various kinds of loadings during its service period, in which in-plane loading is the one which significantly affects the vibration characteristics of the structural elements. In this investigation, the effect of tensile and compressive stresses on vibration characteristics of FG panels has been studied by using finite element technique (FE). For mathematical modelling Poisson's ratio is assumed constant and Young's modulus of elasticity is assumed to vary according to the power-law distribution of volume fraction of the constituents. The plate is modelled by using 8-noded isoparametric element by considering the effect of transverse shear deformation and rotary inertia. The effect of different factors such as volume fraction index, the thickness of the panel, boundary condition and tensile as well as compressive edge loads are considered to study the vibration behaviour of the FGM plate under tensile and compressive uniaxial edge loads. © 2020 Elsevier Ltd. All rights reserved.Item Buckling Response of Functionally Graded Material Plates with Cutouts Subjected to Linearly Varying Loads(Springer Science and Business Media Deutschland GmbH, 2022) Swaminathan, K.; Hirannaiah, H.; Rajanna, T.In most of the studies, the buckling problems are solved analytically based on the assumption that the plates are subjected to only uniform in-plane edge loads without any damages, in spite of the fact that, the real structural components are subjected to various kinds of non-uniform edge loads along with geometrical discontinuous. The current study provides numerical solutions for buckling problems of functionally graded material plates with and without circular cutouts subjected to linearly varying edge loads by using the finite element package (ABAQUS). The effective material properties are found along the thickness using the homogenization technique involving power law function. In the FE modelling, the plate is modelled by using eight noded elements (S8R5) with five degrees of freedom at each node. The influence of various parameters such as size of the cutout and its position, volume fraction index and type of loads are considered to investigate the effect of each parameter on the buckling phenomenon. © 2022, The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.