Conference Papers

Permanent URI for this collectionhttps://idr.nitk.ac.in/handle/123456789/28506

Browse

Author: search.filters.author.Anandhan, S.

Search Results

Now showing 1 - 3 of 3
  • No Thumbnail Available
    Item
    Solubility Limits of Ceria-Zirconia-Lanthana Solid-Solutions
    (Elsevier Ltd, 2017) Abbas, Z.; Surendran, M.; Anjana, P.A.; Jidev, P.K.; Harshini, H.; Sudhakar Naidu, N.; Anandhan, S.; Bhat, K.U.; Bhaskar Babu, G.U.; Prasad Dasari, H.P.
    We demonstrate, the solubility limits of Ceria-Zirconia-Lanthana (CZLa) solid-solutions with the increase in heat-treatment temperature from 600°C to 1300°C. CZLa nano-crystalline samples were successfully synthesized by EDTA-Citrate complex method and were characterized by Raman Spectroscopy (RS) and Transmission Electron Microscopy (TEM) analysis. With an increase in temperature, it is noticed that the solubility limit is decreased in CZLa system. At 600°C, a very good solubility is observed in CZLa system and is confirmed from RS analysis. At higher heat-treatment temperatures (1000 and 1300°C), with an increase in La content, Zr precipitated in the CZLa system and is confirmed from RS analysis. The reason for such kind of behavior in this CZLa system is clearly explained in this work. © 2017 Elsevier Ltd.
  • No Thumbnail Available
    Item
    Dispersion analysis of nanofillers and its relationship to the properties of the nanocomposites
    (Elsevier Ltd, 2021) George, G.; Dev, A.P.; Asok, N.N.; Anoop, M.S.; Anandhan, S.
    The dispersion and distribution characteristics of the reinforcements are the key reasons that influence the mechanical properties of the nanocomposites. In this paper, the dispersion and distribution analysis of nanofillers in a representative polymer is performed and the results are correlated to the crystalline and mechanical properties of the nanocomposite. The nanocomposite used in the present study is Elvaloy®4924 (EVACO)/halloysite nanotubes (HNTs) composite. The dispersion of halloysite nanotubes in the EVACO matrix is recorded as aluminum elemental maps obtained from energy dispersive spectroscopy (EDS). The dispersion and distribution of fillers in the composite are quantified using an image processing technique and it is correlated to the crystalline and tensile properties of the composites. The better dispersion and distribution of HNTs at 1wt.% filler loading resulted in a remarkable improvement in the crystallinity of the composite, which is measured by X-ray diffraction (XRD) and differential scanning calorimetry (DSC). The tensile strength was highest for composites loaded with 1 wt.% filler, and the strength decayed as the loading was further increased. Agglomeration of halloysite nanotubes and polymer-filler debonding was the major reason behind the reduction in tensile strength with filler loading, as observed in the scanning electron micrographs of the fractured surfaces. © 2021 Elsevier Ltd. All rights reserved.
  • No Thumbnail Available
    Item
    Effect of nanofillers on the crystalline and mechanical properties of EVACO polymer nanocomposites
    (Elsevier Ltd, 2021) George, G.; Hareendran, H.; Kumar, T.M.A.; Joshy, S.; Sanju, A.C.; Anandhan, S.
    In this work, the effect of different fillers on the crystalline and mechanical properties of the poly(ethylene-co-vinyl acetate-co-carbon monoxide) (EVACO) terpolymer composite is studied systematically. Alumina trihydrate nanoparticles (nano-ATH), halloysite nanotubes (HNTs), and the multiwalled carbon nanotubes (MWCNTs) are the representative fillers used in the present study. The surface of MWCNTs are decorated using carbonyl, however, nano-ATH and HNTs are used without any surface treatment. The mechanical properties of the composites are evaluated using a tensile test and the improvement in the mechanical properties can be correlated to the improvement in the crystallinity in the composite. The presence of nanofillers in the EVACO matrix significantly influenced the crystallinity, which was determined by X-ray diffraction. The fractography studies reveal the presence of agglomerates at high filler loading results in the subsequent reduction in the tensile properties. Interestingly, the MWCNTs at very low filler loading significantly enhances the tensile properties of EVACO. © 2021 Elsevier Ltd. All rights reserved.