Browsing by Author "Sannayallappa, N."

Now showing 1 - 6 of 6

Influence of combined grain refinement and modification on the microstructure, tensile strength and wear properties of Al-15Si, Al-15Si-4.5Cu alloys
(2015) Channappagoudar, S.; Sannayallappa, N.; Desai, V.; Karodi, V.
Microstructure, tensile strength and dry sliding wear studies of Al-15Si, Al-15Si-4.5Cu alloys with and without grain refinement and modifications are presented. Experimental alloys such as Al-15Si and Al-15Si-4.5Cu were conventionally melted and gravity die cast. For grain refinement, 1 wt.% of Al-1Ti-3B and for modification, 0.17 wt.% of aluminum phosphide (AlP) and 0.4 wt.% of Al-10Sr were added to the alloy melt. The results reveal refined microstructure due to grain refinement, modification, improved hardness, higher tensile strength and better sliding wear. Moreover, Al-15Si-4.5Cu alloy (untreated and treated) showed improved mechanical properties as compared to conventional hypereutectic Al-Si alloy. Carl Hanser Verlag GmbH & Co. KG.
Influence of combined grain refinement and modification on the Microstructure, tensile strength and wear properties of Al-15Si, Al-15Si-4.5Cu alloys
(2015) Channappagoudar, S.; Sannayallappa, N.; Desai, V.; Karodi, V.
Microstructure, tensile strength and dry sliding wear studies of Al-15Si, Al-15Si-4.5Cu alloys with and without grain refinement and modifications are presented. Experimental alloys such as Al-15Si and Al-15Si-4.5Cu were conventionally melted and gravity die cast. For grain refinement, 1 wt.% of Al-1Ti-3B and for modification, 0.17 wt.% of aluminum phosphide (AlP) and 0.4 wt.% of Al-10Sr were added to the alloy melt. The results reveal refined microstructure due to grain refinement, modification, improved hardness, higher tensile strength and better sliding wear. Moreover, Al-15Si-4.5Cu alloy (untreated and treated) showed improved mechanical properties as compared to conventional hypereutectic Al-Si alloy. Carl Hanser Verlag GmbH & Co. KG ISSN 1862-5282.
Influence of combined grain refinement and modification on the Microstructure, tensile strength and wear properties of Al-15Si, Al-15Si-4.5Cu alloys
(Carl Hanser Verlag Kolbergerstrasse 22 Munchen D-81679, 2015) Channappagoudar, S.; Sannayallappa, N.; Desai, V.; Venkateswarlu, V.
Microstructure, tensile strength and dry sliding wear studies of Al-15Si, Al-15Si-4.5Cu alloys with and without grain refinement and modifications are presented. Experimental alloys such as Al-15Si and Al-15Si-4.5Cu were conventionally melted and gravity die cast. For grain refinement, 1 wt.% of Al-1Ti-3B and for modification, 0.17 wt.% of aluminum phosphide (AlP) and 0.4 wt.% of Al-10Sr were added to the alloy melt. The results reveal refined microstructure due to grain refinement, modification, improved hardness, higher tensile strength and better sliding wear. Moreover, Al-15Si-4.5Cu alloy (untreated and treated) showed improved mechanical properties as compared to conventional hypereutectic Al-Si alloy. © Carl Hanser Verlag GmbH & Co. KG ISSN 1862-5282.
Influence of combined grain refinement and modification on the microstructure, tensile strength and wear properties of Al-15Si, Al-15Si-4.5Cu alloys
(Carl Hanser Verlag Kolbergerstrasse 22 Munchen D-81679, 2015) Channappagoudar, S.; Sannayallappa, N.; Desai, V.; Venkateswarlu, V.
Microstructure, tensile strength and dry sliding wear studies of Al-15Si, Al-15Si-4.5Cu alloys with and without grain refinement and modifications are presented. Experimental alloys such as Al-15Si and Al-15Si-4.5Cu were conventionally melted and gravity die cast. For grain refinement, 1 wt.% of Al-1Ti-3B and for modification, 0.17 wt.% of aluminum phosphide (AlP) and 0.4 wt.% of Al-10Sr were added to the alloy melt. The results reveal refined microstructure due to grain refinement, modification, improved hardness, higher tensile strength and better sliding wear. Moreover, Al-15Si-4.5Cu alloy (untreated and treated) showed improved mechanical properties as compared to conventional hypereutectic Al-Si alloy. © Carl Hanser Verlag GmbH & Co. KG.
The influence of the addition of 4.5 wt.% of copper on wear properties of Al-12Si eutectic alloy
(2015) Channappagoudar, S.; Aithal, K.; Sannayallappa, N.; Desai, V.; Mukunda, P.G.
The influence of 4.5 wt.% copper addition on wear behavior of as-cast Al-12Si alloy prepared by gravity casting is investigated in dry sliding against a steel counterface using a pin-on-disk apparatus. The microstructures of test alloys and worn surfaces were examined by scanning electron microscopy and energy dispersing X-ray spectroscopy. The addition of copper to the binary Al-12Si alloy led to the precipitation of CuAl2 phase. Copper addition resulted in a refinement of ?-Al and a minor modification of eutectic Si. The Al-12Si-4.5Cu alloy showed a higher wear resistance as compared to Al-12Si binary eutectic alloy. 2015 Jordan Journal of Mechanical and Industrial Engineering. All rights reserved.
The influence of the addition of 4.5 wt.% of copper on wear properties of Al-12Si eutectic alloy
(Hashemite University huniv@hu.edu.jo, 2015) Channappagoudar, S.; Kiran Aithal, K.; Sannayallappa, N.; Desai, V.; Mukunda, P.G.
The influence of 4.5 wt.% copper addition on wear behavior of as-cast Al-12Si alloy prepared by gravity casting is investigated in dry sliding against a steel counterface using a pin-on-disk apparatus. The microstructures of test alloys and worn surfaces were examined by scanning electron microscopy and energy dispersing X-ray spectroscopy. The addition of copper to the binary Al-12Si alloy led to the precipitation of CuAl2 phase. Copper addition resulted in a refinement of ?-Al and a minor modification of eutectic Si. The Al-12Si-4.5Cu alloy showed a higher wear resistance as compared to Al-12Si binary eutectic alloy. © 2015 Jordan Journal of Mechanical and Industrial Engineering. All rights reserved.