The influence of Al2O3 nanoparticles addition in trace amounts and electroless Ni–P substrate coating on the microstructure development and bond shear strength of Sn-3.0Ag–0.5Cu (SAC305) solder joint were investigated. The performance and reliability of the 2220-capacitor joints with Al2O3 nanoparticle reinforced nanocomposites reflowed on Cu and Ni–P coated substrate were analyzed under varying high-temperature environments. The addition of nanoparticles enhanced the wettability and microhardness of the solder and considerably refined the joint microstructure. The dispersion and adsorption of Al2O3 nanoparticles resulted in the suppression of intermetallic (IMC) growth at the interface and refinement of the ?-Sn grains as well as IMC precipitates into the matrix. The Ni–P coating on the substrate significantly retarded the IMC growth kinetics resulting in the formation of a thin and uniform IMC layer at the joint interface. The thermal stability and performance of the joint under high-temperature environments were enhanced due to the Ni–P coating on the substrate. Compared to the unreinforced SAC305 solder joint with bare Cu substrate, joints with SAC305 + 0.05Al2O3 composite showed about 17% higher shear strength with bare Cu substrate and about 27% higher strength with Ni–P coated substrate. The Weibull distribution analysis indicates a significant improvement in joint reliability of the 2220-capacitor/SAC305 solder assembly using SAC305 + 0.05Al2O3 nanocomposite and Ni-coated substrate. The ANOVA study suggests that the solder joint performance majorly depends on the operating environment, solder composition, and the substrate finish. © 2021, The Author(s), under exclusive licence to Springer Science+Business Media, LLC part of Springer Nature.

	views
Bond shear strength of Al2O3 nanoparticles reinforced 2220-capacitor/SAC305 solder interconnects reflowed on bare and Ni-coated copper substrate	0

	views
September 2025	0
October 2025	0
November 2025	0
December 2025	0
January 2026	0
February 2026	0
March 2026	0

Statistics for Bond shear strength of Al2O3 nanoparticles reinforced 2220-capacitor/SAC305 solder interconnects reflowed on bare and Ni-coated copper substrate

Total visits

Total visits per month