Bharathi, K.D.Udaya Bhat, K.Bhat Panemangalore, P.Arun Kumar, D.S.Rahman, M.R.2026-02-032025Diamond and Related Materials, 2025, 152, , pp. -9259635https://doi.org/10.1016/j.diamond.2024.111922https://idr.nitk.ac.in/handle/123456789/20433Graphene based nanocomposite coatings have incredible scope in enhancing the physical properties of composite materials. In this study, pure Zn and Zn/GO nanocomposite coatings were successfully prepared by electrodeposition technique on the SS304 stainless steel. The Zn/GO nanocomposite coatings were prepared by varying concentration of GO, coating time and CTAB ratio. The nanocomposite coatings were characterized by using the Field emission scanning electron microscopy (FESEM), X-ray diffractometry (XRD), Energy-dispersive X-ray spectroscopy (EDS), and Raman spectroscopy. Cohesion strength (L<inf>C</inf>) using scratch test at RT noticed that the L<inf>C</inf> values increased with the concentration of GO. The scratch tests revealed that Zn/GO composite produced using 40 mgL?1 GO had 70 % increase in cohesion strength (L<inf>C1</inf>) in comparison to pure Zn coating deposited with 30 min of coating time at a ratio of 1:2 GO:CTAB. The magnitude of the residual stress in the nanocomposite coating decreases from ?32 MPa (0 mgL?1 of GO) to ?11 MPa (40 mgL?1 of GO) as the GO concentration increases in coatings due to the effect of the kinetic movement of particles while deposition. © 2024Atomic emission spectroscopyComposite coatingsElectrodepositionX ray diffraction analysisZinc alloysZinc coatingsCoating timeCohesion strengthDiffractometryField emission scanning electron microscopyGraphenesNano-composite coatingProperties of compositesPure znScratch testZn/GO nanocompositeEnergy dispersive spectroscopy