Iyengar, S.Sethuram, D.Shobha, R.Koppad, P.G.2026-02-052021Journal of the Southern African Institute of Mining and Metallurgy, 2021, , 121, pp. 543-54822256253https://doi.org/10.17159/2411-9717/1560/2021https://idr.nitk.ac.in/handle/123456789/23414TiB<inf>2</inf> and CeO<inf>2</inf> particle-reinforced Al6061 hybrid composites were manufactured using stir casting and hot rolling techniques. The base alloy and composites were hot-rolled at 500ºC and a 50% reduction was achieved through 12 passes. The effect of varying TiB<inf>2</inf> and CeO<inf>2</inf> particle additions on the microstructure and mechanical properties of the Al6061 matrix was studied. Scanning electron microscopy showed uniform dispersion of both the reinforcements, with good interfacial bonding. Microhardness and tensile properties like yield and tensile strength were found to be higher for hybrid composite with 2.5% TiB<inf>2</inf> and 2.5% CeO<inf>2</inf> compared to Al6061 alloy and other hybrid composites. The increased tensile strength is attributed to good dispersion and interfacial bonding between the particles and Al6061 matrix. Fracture analysis using a scanning electron microscope revealed ductile fracture for the Al6061 alloy and mixed characteristics of ductile-brittle fracture for hybrid composites. © 2021 South African Institute of Mining and Metallurgy. All rights reserved.Cerium oxideDispersionsHot rollingHybrid compositesMicrohardnessParticle reinforced compositesReinforcementScanning electron microscopyTensile strengthAluminium matrix compositesBase alloysCasting and hot rollingFracture analysisHot-rolledInterfacial bondingmatrixParticle reinforcedStir castingMicrostructure