Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorRao, I.R.
dc.contributor.authorShubhanga, K.N.
dc.identifier.citation2014 International Conference for Convergence of Technology, I2CT 2014, 2014, Vol., , pp.-en_US
dc.description.abstractThis paper presents two mathematical conceptualizations of driving-point system-function measurement of linear time-invariant (LTI) systems with lumped-parameter description. Whereas the formalization of this dual pair of Source-Measure Units (SMU) has been - for the twin purposes of ease of demonstration and ready cognizance - effected with a specific relevance to electrical quantities, the underlying concept of system-function is sufficiently general to be universally applicable to all classes of LTI systems. The formulation has been done in the time-domain, thus retaining full immediacy with the real system variables. The outcome of the measurement, therefore, upon due rationalization, emerges as a rationic polynomial. The natural frequencies of the system are then extractible from the characteristic polynomial, which latter is contained in the measured rationic. The 'naturality' of the system-under-test as observed from a specified port-of-access is thus laid bare. The method is illustrated through examples, which also show the invariance of the system characteristic polynomial with respect to the point of view of the observer, except in cases of pole-zero cancellation. An alternative interpretation of the singularities of the system-function has also been furnished. � 2014 IEEE.en_US
dc.titleObtaining the natural frequencies of linear time-invariant dynamic systems from driving-point system-function measurements employing conceptual source-measure unitsen_US
dc.typeBook chapteren_US
Appears in Collections:2. Conference Papers

Files in This Item:
There are no files associated with this item.

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.