![](/jspui/image/dspace_header.jpg)
Please use this identifier to cite or link to this item:
https://idr.nitk.ac.in/jspui/handle/123456789/8311
Title: | Influence of welding process parameters on microstructure and mechanical properties of friction stir welded aluminium matrix composite |
Authors: | Prabhu, S. Shettigar, A.K. Rao, K. Rao, S. Herbert, M. |
Issue Date: | 2017 |
Citation: | Materials Science Forum, 2017, Vol.880, , pp.50-53 |
Abstract: | In this study, the effect of process parameters on microstructure and mechanical properties of friction stir welded aluminium matrix composites(AMC) have been explored. The results indicated that the recrystallized grain size at the bottom of the weld region is smaller than that at the top region due to difference in the heat transfer at the weld region. The joint strength of AMCs depends on proper selection of process parameters like tool rotational speed and welding speed. If process parameter values are beyond the optimal value, the joint strength decreases due to formation of defects. Maximum tensile strength is obtained for rotational speed of 1000 rpm and welding speed of 80mm/min. � 2017 Trans Tech Publications, Switzerland. |
URI: | http://idr.nitk.ac.in/jspui/handle/123456789/8311 |
Appears in Collections: | 2. Conference Papers |
Files in This Item:
There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.