Please use this identifier to cite or link to this item:
Title: Influence of machining parameters on taper square areas during slant type taper profiling using wire electric discharge machining
Authors: Manoj I.V.
Narendranath S.
Issue Date: 2021
Citation: IOP Conference Series: Materials Science and Engineering , Vol. 1017 , 1 , p. -
Abstract: The oblique/tapered machining is a unique method in wire electric discharge machining to get taper profiles difficult to machine materials. These profiles have many applications like dies, nozzles, inserts, cutting tools and other components. In the present study, a simple square profile is machined using a slant type fixture to achieve a tapered profile made of Hastelloy X. A simple square is machined at different slant angles to get a 0 , 15 and 30 tapered profiles. This paper aims to study the effects of the machining parameters like wire guide distance, wire offset, corner dwell time and cutting speed override on the area of machined profiles. Both scanning electron microscope and coordinate measuring machine were used to measure the areas of 1mm and 5mm. It is observed that as the wire guide distance and cutting speed override increases the area decreases. Whereas in case of wire offset, as offset increases the areas also increase and corner dwell time doesn't affect on the area. As the angle increased the area also increased leading to bigger taper profiles. © Published under licence by IOP Publishing Ltd.
Appears in Collections:2. Conference Papers

Files in This Item:
There are no files associated with this item.

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.