Please use this identifier to cite or link to this item:
Full metadata record
|dc.identifier.citation||Desalination, 2011, Vol.281, 1, pp.199-208||en_US|
|dc.description.abstract||A new analytical model for spiral wound RO module has been recently proposed by Sundaramoorthy et al.  and the same has been validated  with experimental data obtained on a laboratory scale RO unit used for the removal of chlorophenol. In this paper, the need to check the validity of this model with solutes other than chlorophenol is addressed by conducting suitable experiments with dimethylphenol as solute and validating this experimental data with the model. The four model parameters namely solvent transport coefficient Aw, solute transport coefficient Bs, feed channel friction parameter b and the mass transfer coefficient k were estimated. The results show that the mass transfer coefficient is influenced not only by fluid velocity but also by the solvent flux and solute concentration. A new correlation for mass transfer coefficient k, proposed by Sundaramoorthy et al.  for experimental data taken with chlorophenol as solute is also shown to be consistent with the experimental readings recorded in this study taking dimethylphenol as solute. Comparison of model predictions with the experimental observations demonstrated the capability of the model in predicting permeate concentration within 12% error, retentate flow within 5% error and rejection coefficient within 2% error. � 2011 Elsevier B.V.||en_US|
|dc.title||Validation of an analytical model for spiral wound reverse osmosis membrane module using experimental data on the removal of dimethylphenol||en_US|
|Appears in Collections:||1. Journal Articles|
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.