Please use this identifier to cite or link to this item: https://idr.nitk.ac.in/jspui/handle/123456789/12502
Full metadata record
DC FieldValueLanguage
dc.contributor.authorBhat, U.K.
dc.contributor.authorUdupa, R.K.
dc.contributor.authorPrakrathi, S.
dc.contributor.authorHuilgol, P.
dc.date.accessioned2020-03-31T08:39:26Z-
dc.date.available2020-03-31T08:39:26Z-
dc.date.issued2016
dc.identifier.citationTransactions of the Indian Institute of Metals, 2016, Vol.69, 2, pp.623-627en_US
dc.identifier.urihttp://idr.nitk.ac.in/jspui/handle/123456789/12502-
dc.description.abstractAl Fe surface composites were prepared through friction stir processing route by using commercial pure aluminium sheet and iron powder. Friction stir processing was done with a tool made up of high speed steel having a 3 mm pin at the tip. Microstructural features of the friction stir nuggets were characterized by using X-ray diffractometry, scanning electron microscopy, energy dispersive spectroscopy and transmission electron microscopy. Creep behaviour of the friction stir zone was studied using impression creep techniques. Impression creep experiments were done on substrate aluminium and friction stir region. The results show that the surface of Al substrate is converted into a composite, consisting of Al, Fe powders and iron aluminides. The aluminium grain size is drastically reduced, with a large fraction of crystallites having size in the range of 70 nm. Fe particle size was reduced drastically resulting in interparticle spacing in the range of 500 nm. Dislocation density was drastically increased. Impression creep experiments indicated that friction stirred region shows marginally lower activation energy compared to the base metal. This is attributed to the metastability in the structure in the form of extremely fine grain size and high dislocation density. Because of the combined effect, creep in stir zone takes place with a smaller activation energy compared to creep in base aluminium. 2016, The Indian Institute of Metals - IIM.en_US
dc.titleMicrostructure and Impression Creep Behavior of Al Based Surface Composite Produced by Friction Stir Processingen_US
dc.typeArticleen_US
Appears in Collections:1. Journal Articles

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.