Please use this identifier to cite or link to this item: https://idr.nitk.ac.in/jspui/handle/123456789/11362
Full metadata record
DC FieldValueLanguage
dc.contributor.authorKurahatti, R.V.
dc.contributor.authorSurendranathan, A.O.
dc.contributor.authorMordina, B.
dc.contributor.authorNaik, P.
dc.contributor.authorAuradi, V.
dc.date.accessioned2020-03-31T08:31:12Z-
dc.date.available2020-03-31T08:31:12Z-
dc.date.issued2016
dc.identifier.citationTribology - Materials, Surfaces and Interfaces, 2016, Vol.10, 3, pp.101-106en_US
dc.identifier.urihttp://idr.nitk.ac.in/jspui/handle/123456789/11362-
dc.description.abstractThree types of bismaleimide carbon nanotubes (CNTs) nanocomposites were fabricated using two types of original multiwalled CNTs with different diameters and one amide functionalized CNTs. The influence of diameter, content and functionalization of CNTs on the flexural and dry sliding wear behaviour were measured with universal testing machine and pin-on-disc wear apparatus. The experimental results indicated that at 1.5 wt-%, the bismaleimide-functionalized MWCNTs exhibited highest flexural strength of 156 MPa which is increased by 164% as compared to the neat matrix, and lowest specific wear rate of 1.8 10?4 mm3 N?1 m?1 which is decreased by 90% as compared to the neat matrix. This was attributed to the dispersion of CNTs in the matrix and the filler-matrix adhesion and internal strength of the composite. 2016 Informa UK Limited, trading as Taylor & Francis Group.en_US
dc.titleFriction and dry sliding wear of bismaleimide filled with carbon nanotubesen_US
dc.typeArticleen_US
Appears in Collections:1. Journal Articles

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.