Please use this identifier to cite or link to this item:
|Title:||Effect of heat treatment on pitting corrosion resistance of 6061 Al/SiCP composite coated by the cerium oxide film in 3.5 N NaCl solution|
|Citation:||Surface Engineering and Applied Electrochemistry, 2011, Vol.47, 2, pp.176-180|
|Abstract:||One of the main drawbacks of 6061 Al/SiCP composite is its poor pitting corrosion resistance in the aggressive environment containing chloride ions, such as seawater, for example. The present article deals with the investigations of effects of aging on the corrosion behavior of 6061 Al/SiCP composite and of the heat treatment on the pitting corrosion resistance of 6061 Al/SiCP composite coated by cerium oxide prepared by chemical bath technique. Potentiodynamic polarization test was used to study the corrosion behavior of cerium oxide coatings in 3. 5N NaCl solution. The microstructure of cerium oxide was examined by scanning electron microscopy (SEM) and the formed phases were identified by X-ray diffraction (XRD). The pitting corrosion resistance of the cerium oxide coating was found to be improved after heat treatment at 300 C for 30 min. 2011 Allerton Press, Inc.|
|Appears in Collections:||1. Journal Articles|
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.