![](/jspui/image/dspace_header.jpg)
Please use this identifier to cite or link to this item:
https://idr.nitk.ac.in/jspui/handle/123456789/10234
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Revankar, G.D. | |
dc.contributor.author | Shetty, R. | |
dc.contributor.author | Rao, S.S. | |
dc.contributor.author | Gaitonde, V.N. | |
dc.date.accessioned | 2020-03-31T08:18:46Z | - |
dc.date.available | 2020-03-31T08:18:46Z | - |
dc.date.issued | 2014 | |
dc.identifier.citation | Materials Research, 2014, Vol.17, 4, pp.1010-1022 | en_US |
dc.identifier.uri | http://idr.nitk.ac.in/jspui/handle/123456789/10234 | - |
dc.description.abstract | The present work deals with the investigation on machining of difficult-to-machine material titanium alloy (Ti-6Al-4V) using poly crystalline diamond (PCD) tool under different coolant strategies, namely dry, flooded and MQL. Taguchi technique has been employed and the optimization results indicated that MQL lubricating mode with cutting speed of 150 m/min, feed rate of 0.15 mm/rev, nose radius of 0.6 mm and 0.25 mm depth of cut is necessary to minimize surface roughness and dry mode with cutting speed of 150 m/min, feed rate of 0.15 mm/rev, nose radius of 0.6 mm and 0.75 mm depth of cut is necessary to maximize surface hardness. The results indicate the substantial benefit of the minimum quantity of lubrication (MQL) and justify PCD inserts to be the most functionally satisfactory commercially available cutting tool material for machining titanium alloys for better surface finish and hardness. | en_US |
dc.title | Analysis of surface roughness and hardness in titanium alloy machining with polycrystalline diamond tool under different lubricating modes | en_US |
dc.type | Article | en_US |
Appears in Collections: | 1. Journal Articles |
Files in This Item:
There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.