Fast detection and discriminative analysis of volatile organic compounds using Al-doped ZnO thin films

dc.contributor.authorBharath, S.P.
dc.contributor.authorBangera, K.V.
dc.date.accessioned2026-02-05T09:26:51Z
dc.date.issued2021
dc.description.abstractAbstract: Aluminum-doped zinc oxide (AZO) thin films with different doping concentrations have been synthesized by simple spray pyrolysis technique. Precursor solution concentration was maintained ~ 50 mM throughout the fabrication process and dopant concentration was varied from 0 to 5 at. %. Prepared solution was sprayed on top of pre-heated glass plate to get highly adhesive AZO thin films. Various characterization techniques such as X-ray diffraction (XRD), scanning electron microscopy (SEM), UV–Visible spectroscopy were adopted to get an insight into the material formation. Electrical and gas-sensing characteristics were also recorded in detail to evaluate its potential application as a transparent conductor and gas sensor. As determined from XRD analysis, continuous decrease in grain size was observed with increase in aluminum doping concentration. Further, extracting the interplanar distance and lattice parameters, it was noticed that there was a negligible random variation. Aluminum doping also plays a significant role in modifying the surface morphology of thin films. Randomly arranged plate-like structures in undoped ZnO thin films transform to granular morphology with aluminum doping. Minimum resistivity of 0.517?m with ~ 80% transmittance in visible region was achieved at an optimal aluminum doping concentration of 3 at.%. Aluminum doping helps in increasing the sensitivity of ZnO thin films toward various volatile organic compound vapors such as acetone and ethanol. 3 at.% Al-doped thin films were capable of detecting 100 ppm of ethanol and acetone with a highest sensitivity of ~ 60%. Al incorporation to ZnO lattice is also supportive in bringing down the response and recovery time of the sensing material. A very short response time of 3 s and recovery time of 28 s was achieved at 100 ppm of ethanol. Principal component analysis shows proper discrimination between acetone and ethanol. Graphic abstract: [Figure not available: see fulltext.] © 2021, The Author(s), under exclusive licence to Springer-Verlag GmbH, DE part of Springer Nature.
dc.identifier.citationApplied Physics A: Materials Science and Processing, 2021, 127, 9, pp. -
dc.identifier.issn9478396
dc.identifier.urihttps://doi.org/10.1007/s00339-021-04771-8
dc.identifier.urihttps://idr.nitk.ac.in/handle/123456789/23092
dc.publisherSpringer Science and Business Media Deutschland GmbH
dc.subjectAcetone
dc.subjectAdhesives
dc.subjectAluminum metallography
dc.subjectAluminum oxide
dc.subjectChemical sensors
dc.subjectEthanol
dc.subjectGas detectors
dc.subjectGas sensing electrodes
dc.subjectII-VI semiconductors
dc.subjectMetallic films
dc.subjectMorphology
dc.subjectOptical films
dc.subjectOxide minerals
dc.subjectPlates (structural components)
dc.subjectScanning electron microscopy
dc.subjectSemiconductor doping
dc.subjectSpray pyrolysis
dc.subjectSurface morphology
dc.subjectTransparent conducting oxides
dc.subjectVolatile organic compounds
dc.subjectX ray diffraction
dc.subjectZinc oxide
dc.subjectAl doped ZnO thin films
dc.subjectAluminum-doped zinc oxide
dc.subjectCharacterization techniques
dc.subjectGas sensing characteristics
dc.subjectPrecursor solution concentration
dc.subjectResponse and recovery time
dc.subjectSpray-pyrolysis techniques
dc.subjectTransparent conductors
dc.subjectThin films
dc.titleFast detection and discriminative analysis of volatile organic compounds using Al-doped ZnO thin films

Files

Collections