Process parameter optimization for laser directed energy deposition (LDED) of Ti6Al4V using single-track experiments with small laser spot size

Abstract

Single-track experiments are routinely used in the optimization of process parameters in additive manufacturing processes. Most of the process parameter optimization studies use a laser spot size of 1 mm or more. Since laser spot size affects the input energy density and in turn the efficiency of the deposition process, it is important to develop process maps every time a laser of different spot sizes is used. In this work, we determine the process maps for a laser of 0.6 mm spot size. By combining the process maps and the metallographic inspection, we estimate the optimum process parameters (laser power, scan speed, powder feed rate) for building Ti6Al4V components using powder-based laser-directed energy deposition(LDED). Single-tracks corresponding to 64 different parameter combinations are deposited. After eliminating the process parameter combinations resulting in defective tracks, the optimum process parameters of 300 W laser power and 720 mm min−1 scan speed is established by considering the relationship between the process parameters and the geometrical features of the deposit. The experimental results are then used to calibrate the modeling parameters of a three-dimensional finite element model for simulating the deposition process. © 2024 Elsevier Ltd