Effect of reduced geometric dimensions on torque generation in two plate rotor magnetorheological brake with in-house magnetorheological fluid

Abstract

The present study is aimed to evaluate the torque generation capacity of a two plate rotor magnetorheological (MR) brake using in-house prepared MR fluid. The prepared MR fluids were studied for sedimentation rate at different temperatures and flow characterization at different currents and at specific temperatures. The yield stress of the fluid is explored through Herschel-Bulkley model. The results depict significant increase in sedimentation rate and decrease in yield stress with increase in temperature of the MR fluid. MR brake (model-1) is fabricated after finite element method magnetics exhibit magnetic field of approximately 0.145 T in the shear gap than other two models (model-2 and model-3) considered in this study. Characterization of the MR brake illustrates that there is an increase in torque with increasing current. Further tests have been carried out to identify the effect of sedimentation on torque generation at 52 °C after 15 h of sedimentation. The results indicate 16% reduction in the initial torque because of settling of particles. MR fluid and particles characterization illustrates that 322 °C and 400 °C are critical points in controlling the MR fluid input parameters. © 2023 IOP Publishing Ltd.