RF Mems Capacitive Switches for Tunable Microsystems
Date
2019
Authors
Shajahan. E. S.
Journal Title
Journal ISSN
Volume Title
Publisher
National Institute of Technology Karnataka, Surathkal
Abstract
This thesis deals with the design, simulation, fabrication and characterization of low voltage Radio Frequency Micro-electro-mechanical Systems
(RF MEMS) capacitive shunt switches. Switch membrane geometry is
modified to achieve low actuation voltage in the range of 10 − 18:5 V and
good RF performance in different bands. Commercial CAD tool CoventorWare is used for design and DC analysis while RF analysis is carried
out using ANSYS HFSS and Agilent ADS.
Inductive tuning of switch membranes is employed to tune the RF characteristics to optimize X, Ku, K and Ka band performance. Inductance is
added to the shunt membranes by modifying beam geometry. The fabrication of the switches is carried out as a five mask surface micromachining
process on silicon substrate. DC and RF parameters are measured and are
found to be very good. Further, the design, electromechanical and electromagnetic modeling of Single Pole Four Throw switch is carried-out as
part of the thesis. The DC and RF simulation results show low actuation
voltage of 13.75 V, insertion loss and isolation better than 0.7 dB and 52
dB respectively in X-band.
Additionally, wide-band and narrow-band tunable bandpass filters in X
and Ku bands are designed on co-planar waveguides using cantilever series
and capacitive shunt switches and realized as cascaded sections of highpass
and lowpass filters. Tunability in center frequency from 11.76 GHz to
15.86 GHz is achieved by the controlled actuation of shunt switches and
bandwidth tunability from 2.34 GHz to 5.4 GHz by series switches.
Further, distributed true time delay phase shifter is designed on slow wave
co-planar waveguide employing five sets of metallic membranes as floating
shield. The controlled actuation of the floating membranes result in variable capacitive loading and thereby achieving good phase tunability. The
design provided a phase shift tunability in the range 18◦ to 28◦ at 10 GHz,
124◦ to 180◦ at 70 GHz and a liniar variation in the above range for the
intermediate frequencies.
Description
Keywords
Department of Electronics and Communication Engineering, RF MEMS, Series Switch, Shunt Switch, SP4T Switch, Inductive Tuning, Tunable Bandpass Filter, Phase Shifter