Geotechnical Investigations on Marine Clay Stabilized Using Granulated Blast Furnace Slag and Cement

dc.contributor.authorPreetham, H.K.
dc.contributor.authorNayak, S.
dc.date.accessioned2020-03-31T08:31:19Z
dc.date.available2020-03-31T08:31:19Z
dc.date.issued2019
dc.description.abstractMarine clay is present along the coastal region all around the world. This soil is highly problematic and unfit to support any engineering structures. They are characterized by high liquid limit, high plasticity index with low shear strength and high compressibility. The primary by-product generated from the ferrous industry is granulated blast furnace slag (GBFS), and CaO present in GBFS acts as a binding agent. This paper describes the detailed experimental results by incorporation of GBFS and cement to the marine clay. Soil was replaced by GBFS in various percentages (10%, 20%, 30%, 40% and 50%) and addition of cement (2%, 4%, 6%, 8% and 10%) in percentage of dry weight of soil. Soil and various mixtures are examined for its geotechnical properties, which include specific gravity, consistency limits, compaction characteristics, unconfined compression strength and strength parameters. From the unconfined compression test results, 40% GBFS replacing the marine clay is concluded as the optimum mix. Improvement in the strength is due to the formation of CSH, CAH, CASH and other cementitious compounds which are observed in SEM and XRD studies. From the investigation, it is concluded that GBFS with or without cement can be used as a potential stabilizer for soft marine clay. 2019, Springer Nature Switzerland AG.en_US
dc.identifier.citationInternational Journal of Geosynthetics and Ground Engineering, 2019, Vol.5, 4, pp.-en_US
dc.identifier.urihttps://idr.nitk.ac.in/handle/123456789/11409
dc.titleGeotechnical Investigations on Marine Clay Stabilized Using Granulated Blast Furnace Slag and Cementen_US
dc.typeArticleen_US

Files