Modified Odd–Even–Prime pattern for effective dispersion of shade over the PV array under partial shading conditions

Abstract

Photovoltaic (PV) arrays are extensively used for power generation being the most abundant renewable energy sources available. Partial shading of the PV array leads to mismatch between the modules and decrease in output power. A new Modified Odd–Even–Prime (MOEP) method of module arrangement for total cross tied (TCT) connection is presented in this paper to mitigate the effects of partial shading. The proposed MOEP method is a physical relocation method where the modules of PV array are relocated without altering the electrical connections. MOEP method of module rearrangement is based on row positions of the PV array. In this method, the row positions of PV modules in the first column are filled with odd, even and prime numbers in ascending order. The row positions of further columns are formed based on MOEP method. The proposed MOEP method is implemented on 9 × 9 and 8 × 8 PV arrays under various shading patterns. Further, the results are compared with TCT, Odd Even (OE) and Odd–Even–Prime (OEP) patterns. MATLAB/Simulink is used to validate the results. An experimental setup of 9 × 9 and 8 × 8 PV array is developed and tested in real time environment to validate the effectiveness of MOEP method over TCT, OE and OEP methods. The performance of proposed MOEP method is evaluated in terms of GMPP, mismatch power loss (MPL), Fill Factor (FF), Efficiency (η) and Shade Dispersion Ratio (SDR). A detailed study on energy savings from the proposed MOEP method is made on hourly, daily and yearly basis. From the experimental results obtained, it is observed that MOEP method generates a significant improvement in GMPP, efficiency and reduces the mismatch loss compared to TCT, OE and OEP methods. © 2024 International Solar Energy Society