Fenton’s Oxidation of Herbicides in Water
Date
2018
Authors
Sangami, Sanjeev
Journal Title
Journal ISSN
Volume Title
Publisher
National Institute of Technology Karnataka, Surathkal
Abstract
The present study attempts the conventional Fenton’s process (CFP) and advance Fenton’s
process (AFP) for the oxidation of herbicides (2,4-D, dicamba and ametryn) in actual agriculture
runoff water and in aqueous medium. The degradation experiments were initiated with CFPs
(FeSO4.7H2O as a precursor) and later the AFP (FeNPs synthesized from laterite and sustainable
plant extract) was performed. Both RSM (response surface methodology) and Taguchi methods
were applied for the design of experiments. The influence of H2O2/COD, H2O2/Fe 2+ pH and
reaction time were studied on four responses (ametryn, 2,4-D, dicamba and COD removal
efficiency). Agriculture runoff water and aqueous solution were successfully treated by CFPs
with the removal efficiencies of 71-100% and 84.01-100% respectively. The whole oxidation
process was monitored by LC/MS and COD. It was found that compounds were mineralized to
oxalic acid, thiocynate ion and maleic acid for dicamba, ametryn and 2,4-D respectively with the
release of chloride ion. The regression analysis was performed, in which coefficient of variation
(<8), and adequate precision (>12) were in good agreement with model values. Finally, the
treatment process was validated by performing the additional experiments.
In AFPs the Fe nanoparticles were synthesized using Eucalyptus Globulus (EG)(Nilgiri) and
Tactona Grandis (TG)(Teak) extracts. The low cost and locally available laterite was used as a
source of iron rather than using iron salts. The raw laterite particles (RLPs) and synthesized
green iron nanoparticles (GLFeNPs) were characterized using FESEM-EDX, XRD, FTIR, and
BET techniques. The obtained results confirmed that 20-70 nm (EG) and 50-100nm (TG) of
spherical FeNPs were formed (surface area of 31- 36.62 m2/g and pore volume of 0.038-
0.0394cm3/g) for TG and EG respectively. The XRD analysis shows that GLFeNPs consists of
mainly Fe0, Fe2O3, Fe3O4 and polyphenols. Later, the GLFeNPs were applied as a Fenton-like
catalyst and 100% removal of all herbicides was observed. The EG extract is showing higher
polyphenols and antioxidant power than TG extract and the 1st order kinetic model was best
fitted to the experimental data than the 2nd order (R2 >0.85). The AFP is working near to the
neutral pH than CFP and more degradation efficiency was observed in AFP. Finally, the cost
analysis for the synthesis of FeNPs was performed, which is less than the commercial grades and
hence it can be recommended for the alternative novel catalyst for the oxidation studies.
Description
Keywords
Department of Civil Engineering, 4-D, Dicamba, Ametryn, Laterite, Green synthesis, Advance Fenton Process