Improved electrochemical performance of graphene oxide supported vanadomanganate (IV) nanohybrid electrode material for supercapacitors

Simple item page
dc.contributor.authorKumari, S.
dc.contributor.authorMaity, S.
dc.contributor.authorAnandan Vannathan, A.A.
dc.contributor.authorShee, D.
dc.contributor.authorDas, P.P.
dc.contributor.authorMal, S.S.
dc.date.accessioned2026-02-05T09:28:54Z
dc.date.issued2020
dc.description.abstractGraphene oxide (GO)-supported polyoxometalates (POMs) have been considered as promising electrode materials for energy storage applications due to their ability to undergo fast and reversible redox reactions. Herein, vanadomanganate-GO composites (K<inf>7</inf>MnIVV<inf>13</inf>O<inf>38</inf>.18H<inf>2</inf>O-GO with 2:1 and 4:1 ratio) were investigated for use as potential electrode materials in supercapacitors (SCs). The K<inf>7</inf>MnIVV<inf>13</inf>O<inf>38</inf>.18H<inf>2</inf>O (MnV<inf>13</inf>) was synthesized and anchored on GO through electron transfer interaction and electrostatic interaction to make the composite electrodes for the present study. All synthesized electrode materials were fully characterized by various techniques, e.g., Fourier Transform Infrared (FTIR) Spectroscopy, Powder X-ray Diffraction (XRD), Scanning Electron Microscopy/Energy Dispersive X-ray Spectroscopy (SEM/EDS) and High Resolution-Transmission Electron Microscopy (HR-TEM). The electrochemical properties of MnV<inf>13</inf>/GO composites with different MnV<inf>13</inf>/GO ratios were investigated by two-electrode cyclic voltammetry (CV) and galvanostatic charge/discharge (GCD) in different electrolytes. The MnV<inf>13</inf>/GO composite of ratio 2:1 in 1 M LiCl electrolyte and that of ratio 4:1 in 1 M Na<inf>2</inf>SO<inf>4</inf> electrolyte showed significant specific capacitance values of 269.15 F/g and 387.02 F/g, respectively and energy density of 37.38 Wh/kg and 53.75 Wh/kg, respectively for a scan rate of 5 mV/s. Interestingly, the 1:1 (MnV<inf>13</inf>/GO) composite in 1 M Na<inf>2</inf>SO<inf>4</inf> and 1 M LiCl electrolytes showed very low specific capacitance values as the deposition of MnV<inf>13</inf> on GO was not sufficient, as indicated by FTIR and SEM. Thus, it is evident that the specific capacitance value of these composite materials depends on the amount of MnV<inf>13</inf> deposited on GO and these composite materials exhibit the potential to improve the performance of GO-based SCs. © 2019
dc.identifier.citationCeramics International, 2020, 46, 3, pp. 3028-3035
dc.identifier.issn2728842
dc.identifier.urihttps://doi.org/10.1016/j.ceramint.2019.10.002
dc.identifier.urihttps://idr.nitk.ac.in/handle/123456789/24050
dc.publisherElsevier Ltd
dc.subjectBinary alloys
dc.subjectCapacitance
dc.subjectChlorine compounds
dc.subjectCyclic voltammetry
dc.subjectElectrolytes
dc.subjectFourier transform infrared spectroscopy
dc.subjectGlass ceramics
dc.subjectGraphene
dc.subjectGraphene oxide
dc.subjectHigh resolution transmission electron microscopy
dc.subjectLithium compounds
dc.subjectRedox reactions
dc.subjectScanning electron microscopy
dc.subjectSodium sulfate
dc.subjectSupercapacitor
dc.subjectX ray spectroscopy
dc.subjectCyclic voltammograms
dc.subjectElectrochemical performance
dc.subjectEnergy storage applications
dc.subjectGalvanostatic charge/discharge
dc.subjectPowder X ray diffraction
dc.subjectReversible redox reactions
dc.subjectTwo-electrode systems
dc.subjectVanadomanganate
dc.subjectElectrochemical electrodes
dc.titleImproved electrochemical performance of graphene oxide supported vanadomanganate (IV) nanohybrid electrode material for supercapacitors

Files

Collections

Journal Articles