Evaluation of functionally graded YSZ - IN625 clad without bond coat using laser directed energy deposition

Abstract

M-CrAlY or M-Cr-based bond coats are used as a buffer layer to apply ceramic thermal barrier coatings (TBCs) to metal turbine blades. However, due to oxygen diffusion, thermally grown oxides grow over the bond coat material, leading to coating failure in the components. Therefore, this study attempts to fabricate a novel TBC-coated IN625 without bond coat material using a Functional grading approach. The findings from this study may pave the way for processing functionally graded ceramic materials using Laser Additive manufacturing techniques. This study also evaluates the performance of functional grading in joining dissimilar materials using small spot-size laser sources. In the present study, samples were fabricated for three sample conditions: S1: direct clad, S2: 25% linear grading, and S3: 50% linear grading. The interface between Yttria Stabilized Zirconia (YSZ) and IN625 for the S1 sample showed discontinuous and horizontal cracks along the interface due to steep variations in thermal properties. However, the interface of S2 and S3 samples showed good adhesion and a smooth transition in microstructure between IN625 and YSZ as a result of functional grading. SEM micrographs showed homogeneous YSZ distributions without segregation within the IN625 matrix. This was attributed to strong Marangoni flow as a result of the small spot-size laser beam used in this study. © 2023 Elsevier B.V.